Overview
The Smittybilt Limb Risers, part number 7611, are cable limb risers that help keep branches from scratching or cracking the windshield on the trail. They fit Jeep Wrangler TJ and JK models, 2 and 4 door, for 1997 to 2018.
The kit uses a 1/4-inch nylon-coated carbon steel cable with a marine grade stainless steel turnbuckle, which makes the cable easy to keep tight. The brackets are double powder coated to protect the paint.
Key features
- Helps protect the windshield from branch scratches and cracks
- Marine grade stainless steel turnbuckle for adjustment
- 1/4-inch nylon-coated carbon steel cable
- Double powder-coated brackets to protect paint
- Works with factory and aftermarket hood latches
Trail protection tips
Branches are one of the most common hazards on tight trails, and a windshield that takes a hit can crack quickly on a rough drive. Limb risers lift overhanging branches up and over the glass so they slide along the roof rather than scratching or cracking the windshield. They are most useful on trails with dense brush, where a single branch can be hard to see until it is already touching the glass.
Cable risers rely on tension to hold their position, so check the cable and turnbuckle before each trip. Tighten the cable when it sags, and look for fraying where the cable meets the brackets. A loose riser can flap and rub paint, so a quick check at the trailhead helps.
- Re-tension after the first few trail runs
- Check bracket fasteners after rough terrain
- Inspect the cable for fraying or kinks
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 7611 |
| UPC | 631410128345 |
| Cable | 1/4-inch nylon-coated carbon steel |
| Turnbuckle | Marine grade stainless steel |
| Brackets | Two for the hood and two for the windshield, double powder coated |
| Hardware | All hardware included |
| Installation | Minor drilling required |
| Fitment label | Direct Fit |
Vehicle fitment
They fit the Jeep Wrangler TJ from 1997 to 2006 and the Wrangler JK from 2007 to 2018.
Wrangler JL models are not covered, so confirm fit for a JL’s year, model and trim before ordering.
Installation notes
Minor drilling is required. The kit works with both factory and aftermarket hood latches, so check the latch type before you drill.
What’s included
The risers, the double powder-coated brackets and all hardware.

























