Overview
The Smittybilt Front Bumper Adapter, part number 2812, lets you mount most late-model YJ and TJ Wrangler bumpers and winch plates on a CJ. Smittybilt built it for CJ owners who found a bumper they wanted that was made only for the newer YJ or TJ.
The adapter is made from 3/16 inch cold rolled steel with a two-stage textured matte black finish. It is a bolt-on design, and Smittybilt includes all of the parts needed for proper installation.
The adapter is covered by the Smittybilt Advantage Warranty. The YJ and TJ are the bumper sources here, and the CJ is the vehicle it is made for.
Key features
- Lets late-model YJ and TJ bumpers and winch plates mount on a CJ
- Manufactured from 3/16 inch cold rolled steel
- Two-stage textured matte black finish
- Easy bolt-on design
- All parts needed for installation are included
Choosing a front bumper
A front bumper does more than look finished. It carries the winch, recovery points and sometimes lights, so the mounting points on the adapter need to carry real loads without flexing. On a CJ, the mounts and frame rails are the parts to check first, since a bumper bolted to a tired frame can work loose on rough trails. Plan the winch location and cable path before the bumper is mounted.
If a winch is going on, check its mounting plate and bolt pattern against the bumper, and confirm the winch line can run without rubbing the bumper or the tires. Recovery shackles and straps should be rated for the job and inspected for damage before each trip. Hardware should be tightened and checked after the first trail outings, as vibration can loosen bolts.
- Check frame rail mounts for rust or cracks
- Plan the winch cable path before mounting
- Inspect recovery gear before each trip
Specifications
| Brand | Smittybilt |
|---|---|
| Part number | 2812 |
| UPC | 631410092509 |
| Product type | Front bumper adapter |
| Material | 3/16 inch cold rolled steel |
| Finish | Two-stage textured matte black |
| Installation | Bolt-on |
| Warranty | Smittybilt Advantage Warranty |
Vehicle fitment
The adapter is made for the CJ. It is meant to take late-model YJ and TJ Wrangler bumpers and winch plates. Confirm your CJ’s model years before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The adapter is a bolt-on part, and Smittybilt includes all of the parts needed for installation.
What’s included
All of the parts needed for installation are included with the adapter.




















