Overview
The Smittybilt 3/4 inch D-ring shackle in gloss red, model 13047R, is a forged steel recovery shackle rated at 4.75 tons. It gives a vehicle a rigging point for recovery and is finished in gloss red for corrosion resistance.
Smittybilt says its D-ring shackles work with its XRC and SRC Series bumpers as well as other off-road bumpers. The shackle has no drill installation, so it can be fitted without drilling the vehicle.
Key features
- 3/4 inch shackle
- 4.75 ton weight rating
- Forged steel construction
- Gloss red finish
- Corrosion resistant
- Easy, no-drill installation
Choosing recovery rigging
A D-ring shackle is the link between a recovery strap and the vehicle’s mounting point, so it carries the full load of a pull. Before buying, compare the shackle’s rating with the strap, winch line and anchor points in your kit. The weakest link sets the real limit, so every piece of rigging should share a rating at least as high as the pull you expect.
Inspect the shackle before each trip. Look for bent bows, worn pin threads, cracks near the eye, and any flaking of the finish that exposes bare metal. A pin that will not fully seat or a bow that has opened should be replaced rather than bent back. Keep the pin clean and lightly lubricated so it turns freely and seats fully under load.
Specifications
| Brand | Smittybilt |
|---|---|
| UPC | 631410123265 |
| Product type | D-ring shackle |
| Size | 3/4 inch |
| Weight rating | 4.75 ton |
| Finish | Gloss red |
| Construction | Heavy duty forged steel |
| Installation | No drill |
Vehicle fitment
This shackle is not tied to a specific vehicle. Match the 4.75 ton rating and 3/4 inch size to your recovery rigging.
Confirm the shackle’s rating against your recovery setup before ordering.
What’s included
One D-ring shackle in gloss red.




























