Overview
The Crown Automotive lower radiator hose 55111395AC is a direct fit lower hose for the 3.6L six-cylinder (V6) engine. It applies to 2 and 4-door models.
The lower hose carries coolant from the bottom of the radiator toward the engine. No model years are given, so match the body style and engine before ordering.
Key features
- Lower radiator hose position
- Direct fit design
- Made for the 3.6L six-cylinder (V6) engine.
- Notes 2 and 4-door models
Engine and body style matching
V6 engines often route coolant differently from inline designs, so the lower hose length, bend angle and end fittings are not interchangeable across engine families. Comparing the old hose with the new one is the most reliable check. Lay both against each other and confirm the bends, the outlet and inlet positions, and the clamp diameters before you drain the system.
Body style matters when the hose is routed around crossmembers and frame rails. A hose that works on one body style can sit too tight on another. Check the routing with the engine cold, make sure nothing rubs, and leave enough slack that the hose does not stretch or kink when the engine moves on its mounts.
- Compare hose bends and lengths side by side
- Check outlet and inlet positions on the engine
- Confirm clamp sizes before removing the old hose
- Look for rub marks along the routing after a short drive
Specifications
| Brand | Crown Automotive |
|---|---|
| Part number | 55111395AC |
| UPC | 848399088137 |
| Hose position | Lower |
| Engine | 3.6L six-cylinder (V6) |
| Body style | 2 and 4-door models |
| Fit type | Direct fit |
Vehicle fitment
This hose fits 2 and 4-door models with the 3.6L six-cylinder (V6) engine. Check your engine and body style before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is the lower radiator hose only.








