Overview
The Omix-Ada 17118.26 Cooling System Kit is a set of cooling parts for 1991–1995 Jeep Wrangler (YJ) models with the 4.0L six-cylinder engine.
The kit provides new upper and lower radiator hoses, a thermostat housing, a 195 degree thermostat with gasket and four radiator hose clamps, so the cooling system can be serviced with matched parts together.
Key features
- Upper and lower radiator hoses, both new parts
- Thermostat housing with a 195 degree thermostat and gasket
- Four radiator hose clamps included
- Direct fit for the listed 1991–1995 YJ trims
Choosing a cooling kit
Replacing the cooling parts as a set makes sense when the hoses are the same age and show similar wear. Hoses that feel brittle, bulge or weep at the ends often point to the rest of the system being near the end of its life. A thermostat that sticks open or closed affects warm-up and temperature, so it is worth checking when the housing is already off.
Before starting, drain the coolant into a container, label the old parts and compare each new piece side by side. Clean the mating surfaces on the engine and housing so the new gasket seals evenly. Keep the four clamps in the same positions as the old ones and tighten them evenly. Bleed air from the system after refilling, since trapped air can cause hot spots and erratic gauge readings.
- Check hose ends for swelling or cracks
- Replace the gasket whenever the housing is opened
- Refill with the coolant type the engine requires
Specifications
| Brand | Omix-Ada |
|---|---|
| Part number | 17118.26 |
| UPC | 804314295622 |
| Engine | 4.0L 6 cylinder |
| Thermostat | 195 degree |
| Kit contents | Upper and lower radiator hoses, thermostat housing, thermostat, gasket, four radiator hose clamps |
| Fitment type | Direct fit |
Vehicle fitment
It fits this Jeep model:
- 1991–1995 Jeep Wrangler (YJ) (Base, Islander, Renegade, Rio Grande, S, SE, Sahara)
Its fit covers 1991–1995 Wrangler (YJ) models only. Confirm the year, model and trim for your vehicle before buying.
Installation notes
Drain the old coolant, install the kit components and refill the system. Let the engine cool fully before opening the cooling system, since hot coolant can cause burns.
What’s included
Upper and lower radiator hoses, thermostat housing, thermostat with gasket, and four radiator hose clamps.
Not included: Coolant is not part of the kit.









