Overview
The S&B Filters 75-5085 is a cold air intake for the 2017–2018 Ford Super Duty with the 6.7L Powerstroke diesel, using an oiled filter. It is designed to reduce air restriction on the way to the turbo inlet and provides 55.97% more airflow than the stock intake.
The kit has a fully enclosed airbox that shields the filter from dirt and engine heat. It is designed to run with stock calibration or enhanced tuning, and its mapped Mass Air Flow Sensor is designed to avoid check engine lights. It fits F-250 and F-350 Super Duty trucks in the trims below.
Key features
- Fully enclosed airbox that keeps dirt out of the filter and blocks engine heat
- Large oiled filter carrying 107 grams of oil
- Intake box and battery relocated, putting the intake directly in line with the front air inlet
- Intake tube with minimal bends running to the turbo inlet
- Mapped Mass Air Flow Sensor designed to avoid check engine lights
- Designed to run with stock calibration or enhanced tuning.
Engine bay changes to expect
A relocated intake box and battery change the layout under the hood, so the old routing and cable paths may no longer fit. Before installation, look at the battery cable length, the coolant lines and the wiring harness route. Plan clearance for the airbox lid so the cover can open fully during service.
Heavy-duty diesel intakes draw a lot of air through a relatively small inlet, which makes inlet position important. Keep the front inlet free of debris, and check that the intake tube is seated tightly at the turbo inlet. Recheck clamp tightness after the first heat cycles, since hoses expand and settle as the engine warms.
- Check battery cable reach before mounting
- Confirm airbox lid clearance
- Recheck clamps after the first heat cycles
Specifications
| Brand | S&B Filters |
|---|---|
| Part number | 75-5085 |
| UPC | 841372037122 |
| Filter type | Oil |
| Filter housing | Full enclosure |
| Intake type | Cold air |
| Inlet tube | Included |
| Airflow gain | 55.97% more than stock |
| Filter efficiency rating | 99.56% |
| Oil quantity | 107 grams |
| Emissions approval | 50 State Legal, D-590-17 |
| Fitment | Direct fit |
Vehicle fitment
It is a direct fit for the 2017–2018 Ford F-250 Super Duty and F-350 Super Duty in the King Ranch, Lariat, Limited, Platinum, XL and XLT trims.
Other Super Duty model years and the F-450 and F-550 are not covered. This kit is for the 6.7L Powerstroke only, so confirm fit for your year, model and trim before ordering.
Installation notes
This design relocates the intake box and battery, so expect the engine bay layout to differ from stock. Disconnect the battery before working in the engine bay, as with any intake change.
Recall notice: S&B Filters is recalling certain cold air intake kits for 2017 and 2018 Ford Super Duty Powerstroke 6.7L vehicles produced before November 30th, 2017. Kits bought new, or bought directly from S&B after November 30th, 2017, are not affected. If you bought an earlier kit or bought from another seller, you might be affected; check the status at www.sbfilters.com/recall.
What’s included
The inlet tube is included. Check the rest of the box contents against your installation before starting.
















