Overview
The S&B Filters 75-5077D is a cold air intake kit with a dry extendable filter for the 2010–2014 Ford F-150. The intake is designed to reduce airflow restriction, and the kit is 50 State Legal under CARB EO# D-590-12.
S&B designs its intakes in the U.S. and tests them against competitors under ISO 5011 standards. The kit suits F-150 owners in the trims below who prefer a dry filter over an oiled one.
Key features
- Dry extendable filter element
- Engineered to reduce airflow restriction.
- Tested under ISO 5011 standards against competitor kits
- 50 State Legal with CARB EO# D-590-12
Dry filter inspection and seals
Dry extendable media is not oiled, so the cleaning steps used for cotton filters do not apply. Inspect the element at regular intervals and replace it when the pleats are torn, crushed or heavily loaded with dirt. Tapping loose dust away is a reasonable first step, but blowing high-pressure air through the media can damage it.
The sealing path matters as much as the filter. Make sure the element sits squarely in the housing, the gasket is not pinched, and the clamps are tight after installation. On dusty trails, a short inspection after each outing helps catch a loose clamp before dirt gets past the element.
- Check the element for torn pleats
- Confirm the gasket sits flat
- Retighten clamps after the first drives
Specifications
| Brand | S&B Filters |
|---|---|
| Part number | 75-5077D |
| UPC | 841372035753 |
| Filter type | Dry extendable |
| Emissions approval | 50 State Legal, CARB EO# D-590-12 |
| Fitment | Direct fit |
Vehicle fitment
It is a direct fit for the 2010–2014 Ford F-150 in the FX2, FX4, Harley-Davidson Edition, Lariat, Lariat Limited, Platinum, SVT Raptor and XLT trims.
Other Ford trucks and F-150 years outside 2010–2014 are not covered by this list.
Installation notes
Dry filter media is not oiled, so the oil-cleaning step used with cotton filters does not apply here. Inspect the element at regular service intervals.
What’s included
Check the package contents for piping, clamps and mounting hardware before starting the installation.









