Overview
The Rugged Ridge Standard Front Bucket Seat in nutmeg, part number 13401.07, is a replacement seat for earlier Jeep restoration work. The automotive grade vinyl upholstery has a fixed, non-reclining back, an integrated headrest, and horizontal stitching that matches the original factory look.
It suits CJ5, CJ7, Scrambler, YJ and TJ Jeep Wranglers from the 1976 to 1995 and 1997 to 2002 model ranges. The seat reuses the original mounting hardware and bolts from factory seats, which fits projects aiming for an authentic cabin.
Key features
- Automotive grade vinyl upholstery
- Fixed, non-reclining back
- Integrated headrest
- Horizontal stitching in the original Jeep style
- Reuses original mounting hardware and bolts
- Nutmeg color, front seat location
Choosing the right setup
Nutmeg is a warm brown that pairs well with tan or cream interiors, so it is worth checking the rest of the cabin before choosing a finish. A seat that matches the door panels and carpet tends to look more like a complete restoration.
When comparing seats for an older Jeep, think about how often the vehicle will be used on rough trails. A fixed back holds its position without moving, which many builders prefer for a simple, stable seating position. If the vehicle is also driven on pavement every day, the upholstery will see more sun and friction, so a seat cover or regular cleaning can help keep the finish looking good.
Consider the mounting side as well. Older Jeeps often have worn floor holes, and a seat set in a slightly misaligned position can rub against the console or shifter. Test the fit with the seat loosely bolted before tightening anything.
- Check how the nutmeg finish matches the rest of the interior
- Test-fit the seat before final tightening
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 13401.07 |
| UPC | 804314120214 |
| Seat type | Stationary highback, fixed back |
| Seat location | Front |
| Color | Nutmeg |
| Material | Automotive grade vinyl |
| Mounting | Original factory hardware and bolts |
| Adapters for 1997 to 2002 Wrangler (TJ) | 13201.11 (left side) and 13201.12 (right side) |
| Fitment type | Direct fit |
Vehicle fitment
The fitment entries for this seat cover the 1976–1983 CJ5, 1976–1986 CJ7, 1981–1985 Scrambler, 1997–2002 TJ and 1987–1995 YJ Wranglers, with the trim names Rugged Ridge gives for each. Models outside those entries, such as the later Wrangler generations, the Gladiator and the Cherokee XJ, are not covered.
The TJ entry ends at 2002, so confirm that your TJ falls inside the listed range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The seat reuses factory mounting hardware, which suits a direct bolt-in on the listed models. Only the 1997 to 2002 TJ Wranglers call for adapters, so check your year before you start. Keep the seat fully secured before driving.
What’s included
One nutmeg standard front bucket seat with an integrated headrest.
Not included: seat adapters 13201.11 (left side) and 13201.12 (right side) for 1997 to 2002 TJ Wranglers.
