Overview
The Rugged Ridge 13551.09 is a dash CB mount holder that sets a CB radio on the dash board without drilling. It fits the 2004–2006 Jeep Wrangler LJ, including Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler TJ in several trims.
The bracket is designed for a TJ dash. Installation swaps two dash screws for the longer screws supplied in the kit, and then the CB goes on the holder. Keeping the radio close at hand saves you from reaching across the cab on the trail.
Key features
- No-drill mounting bracket for dash installation
- Replaces two dash screws with longer screws supplied in the kit
- Black powder coat finish
- Features a plate and a microphone mounting plate
Dash mounting considerations
A dash-mounted CB sits within easy reach of the driver, which makes it simpler to change channels on a long climb. The trade-off is that the radio occupies dash space and can block a view of the gauges or the passenger’s knees. Position the holder so the faceplate and microphone can be reached without stretching.
Because the holder replaces two dash screws with longer ones, the fastener length matters. Keep the removed screws in a labeled spot so they can be returned if the mount is removed later. Check that the longer screws seat fully without bottoming out, and avoid overtightening into the dash plastic.
Dash mounts can loosen over time as the vehicle flexes on uneven ground. Inspect the holder at regular service intervals and tighten fasteners when needed. If the dash plastic cracks around the mount, replace the affected parts before the radio starts moving.
- Check the holder before routing cables
- Keep the microphone cable clear of the pedals
- Recheck screw tightness after rough trail use
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 13551.09 |
| UPC | 804314228354 |
| Mounting method | Dash board, no drilling |
| Finish | Black powder coat |
| Screws | Longer dash screws supplied in the kit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon, and the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X.
Wrangler JK models are not on the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Remove the two dash screws, replace them with the longer screws from the kit, then set the CB on the holder. No drilling is needed.
What’s included
The kit includes the plate, the microphone mounting plate and the longer dash screws.
Not included: the CB radio.









