Overview
The Rugged Ridge CB Radio Windshield Mount, part number 13551.07, is a steel bracket that holds a CB radio above the rearview mirror. It fits the 2004-2006 Jeep Wrangler LJ and the 2003-2006 Jeep Wrangler TJ.
A CB radio is one of the most useful tools on a backwoods trail, where cellphone coverage is limited. Mounted on the dash, the radio is easy to bang a knee against. Rugged Ridge positions this mount directly above the rearview mirror so the radio is easier to see and reach, and there is no need to lean across the cab to change channels or find a loose microphone.
Because the mounting pattern is universal, the bracket is not tied to one radio. It is designed to work with most radio manufacturers’ mounting brackets, so check that your radio’s bracket is compatible before fitting the mount.
Key features
- Mounts the CB radio above the rear view mirror instead of on the dash
- Universal pattern designed to work with most radio manufacturers’ mounting brackets
- Constructed of Q235 steel with a gloss black powder coat
- Black zinc-coated hardware for a factory-finished look
Choosing a CB radio setup
A CB radio mounted overhead changes how you use it on the trail. Placing the radio above the mirror keeps the faceplate in view and the controls within reach without leaning across the cab. It also moves the microphone cable and antenna lead away from the dash, which can make the wiring easier to route cleanly.
Before buying a mount, confirm that your radio’s own bracket fits the universal pattern. Measure the bracket’s bolt spacing and check the screws that will secure it to the windshield frame area. Route the power and antenna cables along the headliner and pillar trim, keeping them clear of airbags and the rearview mirror arm.
Over time, vibration can loosen the hardware, and the powder coat may chip where the bracket contacts the glass or trim. Inspect the mount and fasteners at each service, and touch up any bare metal to slow corrosion. A mount that stays tight keeps the radio steady over bumps.
- Check the radio bracket’s bolt spacing
- Keep the antenna cable away from the wiper area
- Retighten the mount after the first rough trail run
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 13551.07 |
| UPC | 804314290399 |
| Material | Q235 steel |
| Finish | Gloss black powder coat |
| Hardware | Black zinc-coated |
| Mounting location | Above the rear view mirror |
| Mounting pattern | Universal, for most radio manufacturers’ mounting brackets |
Vehicle fitment
Rugged Ridge’s manufacturer fitment list covers the 2004-2006 Jeep Wrangler (LJ), including the Unlimited and Unlimited Rubicon, and the 2003-2006 Jeep Wrangler (TJ), including the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X. Based on that list, the mount is intended for those vehicles.
The list does not include the 2007-2018 Jeep Wrangler (JK) or the Wrangler JL. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The mount comes with black zinc-coated hardware. Not included: the CB radio itself.




















