Overview
The Rugged Ridge D-Rings, part number 11235.04, are black powder-coated D-rings made from rigid cast steel. Each D-ring has a 3/4-inch center pin and a 9,500 lb working load limit, and they are sold as a pair.
They are a universal application part, so they are not tied to one vehicle. They suit most recovery operations.
Key features
- Black powder-coated finish
- 3/4-inch center pin
- 9,500 lb working load limit for each D-ring
- Sold as a pair
- Universal application
Choosing the right recovery gear
A D-ring is one link in a recovery chain, and the chain is only as strong as its weakest piece. Match the D-ring rating to your winch, strap and shackles, and do not exceed the lowest rating in the set. Keep the pin size in mind, since a 3/4-inch pin may not suit every mount or bracket.
Powder coating protects the steel from weather and abrasion, but it can chip when the D-ring is dragged over rock or dropped. Clean off grit and mud after use, and check the finish for bare metal, which can start to rust. Store recovery gear dry and out of direct sun when possible.
- Check the lowest rating in the chain
- Confirm the pin fits your mount
- Touch up chips before they spread
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 11235.04 |
| UPC | 804314255916 |
| Material | Rigid cast steel |
| Finish | Black, powder coated |
| Center pin | 3/4-inch |
| Working load limit | 9,500 lb each |
| Quantity | Pair |
| Fitment | Universal Fit |
Vehicle fitment
Universal application, so it is not vehicle-specific. Match the 3/4-inch center pin to the mount or bracket you plan to use before recovery use.
What’s included
A pair of D-rings.
Not included: mounts or brackets, none of which are described.









