Overview
The Rugged Ridge 18303.10 is a black 3-inch body lift for the Jeep Wrangler TJ and the 2004–2006 Wrangler LJ Unlimited and Unlimited Rubicon. It is rated to fit tires up to 33 inches. It fits 1997–2004 TJs with manual transmissions and 1997–2006 TJs with automatic transmissions.
The spacers are made from polyethylene, and the kit is a direct fit at 3 inches. It is finished in black.
Key features
- 3-inch body lift
- Polyethylene spacers
- Rated for tires up to 33 inches
- Fits manual or automatic TJs, depending on model year
- Black finish
Polyethylene spacers in service
Polyethylene is a tough plastic that resists moisture and corrosion, which suits spacers that sit between the body and frame in wet or salty conditions. Check that each spacer sits flat and that the bolts are snug, since a gap or loose fastener can let the body shift on rough trails.
Tire size drives most of the decisions here. A larger tire increases stress on steering components, brake lines and the drivetrain, so consider upgrades such as extended brake lines and a check of steering stops if you go up in size. Re-torque the hardware after the first few drives and inspect the spacers for cracks or deformation at each service. A new lift is also a good time to check the transfer case and driveline angles before any aggressive off-road use.
Specifications
| Brand | Rugged Ridge |
|---|---|
| Part number | 18303.10 |
| Lift | 3 inches |
| Spacer material | Polyethylene |
| Color | Black |
| Maximum tire size | 33 inches |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1997–2006 Jeep Wrangler (TJ), including 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims, and the 2004–2006 Jeep Wrangler (LJ), including Unlimited and Unlimited Rubicon trims.
Match the TJ year to your transmission type before ordering, since manual and automatic years differ. Wrangler JK and JL models are not covered. Confirm your vehicle’s year, model and trim before ordering.










