Overview
The Rubicon Express RM10000 is a sway bar bushing sleeve, sold under part number RM10000. It is used with the sway bar bushing and is a universal fit. Confirm the sleeve’s material, length and diameter against your bushing and sway bar before ordering.
A bushing sleeve has to match the bushing and the sway bar diameter. Check the vehicle, the sway bar and the bushing type before buying, and confirm fit for your vehicle’s year, model and trim.
Key features
- Sway bar bushing sleeve
- Universal fit
- Part number RM10000
Checking sleeve and bushing fit
The sleeve sits between the bar and the bushing, so its job is to keep the bushing seated and reduce wear on the bar. Fit matters because a sleeve that is too loose lets the bushing move, and one that is too tight can make the bushing hard to install. Measuring the bar and bushing before buying is the simplest way to avoid either problem.
Once the parts are assembled, check that the sleeve sits square and the bushing turns or flexes freely. A suitable lubricant may be used where the bushing design allows it, but keep it off parts that are not meant to be wet. Inspect the sleeve, bushing and bar mounts at regular service, especially after off-road use.
- Measure the sway bar diameter before ordering
- Check the bushing type against the sleeve
- Inspect for cracks or flattening
- Replace sleeves and bushings together when worn
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RM10000 |
| UPC | 614901444445 |
| Type | Sway bar bushing sleeve |
| Fitment listed | Universal fit |
Vehicle fitment
Fit depends on the bushing and sway bar, since universal fit does not confirm a match to a particular bar or bushing. Check the sleeve dimensions against your parts before ordering.
Confirm the sway bar diameter and bushing type against the sleeve before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A sway bar bushing sleeve is fitted over the bar or inside the bushing, depending on the design, so check how the sleeve seats before the bushing is installed. Confirm the sleeve sits square and the bushing turns freely once the parts are assembled.
What’s included
One sway bar bushing sleeve, part number RM10000.
