Overview
The Energy Suspension 2.5111R is a red polyurethane rear sway bar bushing set for a 16mm bar. It fits the 2004–2006 Jeep Wrangler LJ Unlimited and Unlimited Rubicon, the 1997–2006 Jeep Wrangler TJ, and the 1987–1995 Jeep Wrangler YJ.
Energy Suspension says its HYPER-FLEX polyurethane outlasts factory rubber, and that its bushings and end links help a sway bar work more effectively.
Key features
- Red polyurethane rear sway bar bushing set
- 16mm bar diameter
- Fits LJ Unlimited, TJ and YJ Wrangler trims
- HYPER-FLEX polyurethane construction
- Direct fit listed by the brand
Rear sway bar wear
The rear sway bar works with the rear suspension to control body roll and keep the axle from leaning. Its bushings take constant rotation and load, so they can crack, flatten or lose grip over time. Common symptoms include a knock from the rear over uneven ground and a loose feel when the vehicle turns.
Trail use puts extra stress on bar and link components, especially with larger tires or a lift. Inspect the bushing sleeves and brackets for rust, and clean any corrosion before fitting new parts. Replacing the rear end links at the same time is a common choice, since they wear alongside the bushings. After installation, check the bar bolts during the first few outings, as new bushings often settle slightly.
Specifications
| Brand | Energy Suspension |
|---|---|
| Part number | 2.5111R |
| UPC | 703639261599 |
| Position | Rear |
| Color | Red |
| Bar diameter | 16mm |
| Material | Polyurethane (HYPER-FLEX) |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler LJ (Unlimited and Unlimited Rubicon), the 1997–2006 Jeep Wrangler TJ (65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X), and the 1987–1995 Jeep Wrangler YJ (Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport).
Wrangler JK years from 2007 to 2018 and the Wrangler JL fall outside this range, and LJ trims other than Unlimited are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bar is 16mm and the set is for the rear position, so check both against your vehicle before installing.
What’s included
The set comes with bushings and end links. Check the package contents against your installation before starting.
Not included: Check the package contents against your installation before starting, including whether your rear sway bar is already in place.









