Overview
The Rock Slide Engineering RB-F-100-JK is a rear bumper with an integrated pivot tire carrier for 2007–2014 Jeep Wrangler (JK) two-door and four-door models.
The Integrated Pivot Tire Carrier attaches to the tailgate and is designed to open with the tailgate in one smooth motion without stress on the hinges. It accepts tires up to 42 inches. The bumper is 3/16-inch alloy steel on 1/4-inch mounting plates, with two recovery shackle points anchored to the frame and an integrated 2-inch recessed receiver hitch.
The tire carrier is fully adjustable, and oversized bearings at the pivot point keep its load off the tailgate hinges. The bumper is made in the USA with a black powder coat finish.
Key features
- Integrated Pivot Tire Carrier that opens with the tailgate
- Tire carrier accepts tires up to 42 inches
- Fully adjustable mounting system for the carrier
- 3/16-inch alloy steel bumper with 1/4-inch mounting plates
- Two recovery shackle points anchored to the frame
- Integrated 2-inch recessed receiver with 1/4-inch steel safety chain loops
- Oversized bearings at the pivot point
- Made in the USA
Tailgate and tire carrier care
A tailgate-mounted tire carrier puts the weight of the spare on the tailgate hinges and latch, so the hinges and pivot points need regular attention. Check the pivot bearings for play and look for cracks where the carrier bolts to the tailgate. A spare heavier than the carrier can comfortably handle adds stress to the whole rear end, so choose tire size and wheel weight with that in mind.
Rear bumpers with carriers also change the rear overhang and approach geometry, which matters on steep climbs and ledges. When the bumper and carrier are installed together, it is a good time to check the driveshaft angle and the rear brake lines. Retighten the carrier bolts after the first few drives, since the carrier can settle on its mounts as the hardware seats.
- Check pivot bearings for play every few months
- Inspect tailgate mount welds for cracks
- Keep the spare tire inflated to the correct pressure
Specifications
| Brand | Rock Slide Engineering |
|---|---|
| Part number | RB-F-100-JK |
| UPC | 887753114853 |
| Product line | Rigid Rear Bumper with Integrated Pivot Tire Carrier |
| Position | Rear |
| Fitment type | Direct fit |
| Material | 3/16-inch alloy steel; 1/4-inch mounting plates |
| Finish | Black powder coat |
| Receiver hitch | 2-inch, recessed |
| Safety chain loops | 1/4-inch steel |
| Tire carrier | Included; accepts tires up to 42 inches |
| D-ring mount | Included (2 shackle points) |
| Origin | Made in the USA |
Vehicle fitment
It is for 2007–2014 Jeep Wrangler (JK) models, including the Rubicon, Sahara, Sport and Unlimited versions.
Models from 2015 through 2018 (JK) and the JL from 2018 on fall outside the 2007–2014 range. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The tire carrier is fully adjustable and attaches directly to the tailgate, so the mounting is set up as part of the install.
What’s included
The bumper with its integrated pivot tire carrier, two shackle points and 2-inch receiver.












