Overview
The Bestop Highrock 4×4 Modular Rear Bumper, part number 44940-01, is a black powder coated, bolt-on rear bumper for the 2007–2018 Jeep Wrangler JK.
The bumper has a high-access profile that gives more clearance over rocks and trail obstacles, and it is made of 3/16″ thick steel. Its modular design lets owners build up the rear with optional accessories such as end caps, a heavy-duty tire carrier and a departure roller kit. Fully-welded D-ring shackle mounts with a 1″ inside diameter are included.
Key features
- High-access profile for more clearance over rocks and obstacles
- 3/16″ thick steel
- Modular design that accepts optional end caps, tire carrier and departure roller
- Fully-welded D-ring shackle mounts, 1″ inside diameter
- Bolt-on installation at existing factory bumper mounting locations, no drilling
- E-coat base layer with matte-black powder coat top finish
Modular bumpers and accessories
A modular rear bumper is built to take add-on parts, so the choice of accessories shapes how the setup works on the trail. End caps help finish the corners, a tire carrier adds weight at the back, and a departure roller kit protects the bumper when the rear approach is steep. Each accessory changes the load and leverage on the mounting points, so think about the total before adding a carrier or roller.
Because the bumper bolts to the factory mounting locations, the vehicle’s rear suspension and frame still carry the load. Check the bolts after the first trail runs and after any hard impact. Shackles on the D-ring mounts should be sized to match the inside diameter, and inspect them for wear each time you use them. A bumper that has taken an impact should be checked for bent brackets and cracked welds before the next trip.
- Plan accessories before the first install
- Check shackle size against the mount diameter
- Inspect factory mounting points after trail use
Specifications
| Brand | Bestop |
|---|---|
| Part number | 44940-01 |
| UPC | 77848131722 |
| Product type | Modular rear bumper |
| Position | Rear |
| Material | Steel, 3/16″ thick |
| Finish | Electrostatically-applied E-coat base with matte-black powder coat |
| D-ring shackle mounts | Fully-welded, 1″ inside diameter, included |
| Installation | Bolt on, no drilling |
| Receiver hitch | No |
| Tire carrier | Not included |
Vehicle fitment
It fits the 2007–2018 Jeep Wrangler JK.
It does not fit the TJ, LJ or JL Wrangler. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bumper bolts to the existing factory bumper mounting locations without drilling.
What’s included
- Modular rear bumper
- Fully-welded D-ring shackle mounts
Not included: accessories such as end caps, the tire carrier and the departure roller kit.









