Overview
The Road Armor FJ801Z is a Stealth series front winch bumper for the 2007–2014 Toyota FJ Cruiser. It is made of unfinished raw steel and has a Titan II guard with round light ports.
The bumper is a full-width replacement with a built-in winch mount that houses a non-integrated winch up to 12k, plus recessed pods for a pair of 4-inch-diameter lights. Road Armor recommends PIAA 510 or Warn 350F lights for most applications. The bare steel finish suits owners who plan to paint or coat the bumper themselves.
Key features
- Titan II guard with round light ports
- Recessed light pods sized for dual 4-inch-diameter lights
- Winch mount that houses up to a 12k non-integrated winch
- Fully welded front and back shackle mounts
- Faceted 3/16 outer shell with 1/4-inch-thick internal mounting brackets and gussets
- Guard tubing with .120 wall
- The bumper is backed by a lifetime guarantee against breakage.
- Made in the U.S.A.
Bare steel and off-road use
Bare steel protects nothing until it is coated, so it should be cleaned, primed and painted before the bumper is exposed to weather. Light surface rust can be removed with a wire brush, and a steel-suited primer helps the topcoat bond. Check welds and shackle mounts for gaps before sealing.
A winch bumper takes repeated loads when recovering a vehicle, so inspect mounts, bolts and the winch plate after each trip. Keep the winch cable and hook stowed to avoid snagging the light pods or the guard. Clean mud from the light pods so the lights stay visible.
Owners who add a winch should plan the power feed, a fused circuit and a switch before installation. Routing cables through protected channels keeps them away from heat and moving parts.
- Clean and prime before painting
- Inspect shackle mounts after recovery
Specifications
| Brand | Road Armor |
|---|---|
| Part number | FJ801Z |
| UPC | 8118730246 |
| Series | Stealth |
| Position | Front |
| Width | Full |
| Material | Steel |
| Finish | Bare (unfinished raw steel) |
| Guard | Titan II, round light ports |
| Light mounts | Included |
| Winch mount | Included, up to 12k non-integrated winch |
| D-ring mount | Included |
| Fit type | Direct fit |
Vehicle fitment
The FJ801Z fits the 2007–2014 Toyota FJ Cruiser as a direct-fit front bumper.
It does not fit other Toyota trucks or SUVs. Verify your vehicle’s year, model and trim match before ordering.
Installation notes
Bare steel arrives unfinished, so plan on painting or coating the bumper before it sees weather. Lights and the winch are separate items; the bumper provides the mounts for them.
What’s included
- Front bumper with Titan II guard
- Winch mount
- Light mounts
- D-ring mount
Not included: Winch, lights and wiring.









