Overview
The Rhino-Rack Wind Fairing, part number RF4, is a 50 inch roof rack wind fairing that attaches to cross bars with universally fitting clamps. It fits 42 vehicle entries, starting with the 2001-2013 Acura MDX.
The fairing is engineered to reduce wind noise by deflecting air around the load. It attaches to cross bars from most major roof rack brands and is styled to match the vehicle and roof racks.
Key features
- 50 inch long wind fairing
- Reduces wind noise while driving
- Universally fitting clamps
- Attaches to cross bars from most major roof rack brands
- Easy to install and remove
- 5 year warranty stated
Choosing cross bars
A wind fairing is only as steady as the cross bars it clamps to. Before fitting, measure the bar diameter and shape and make sure the clamps grip the bar fully without crushing it. Bars of different profiles can sit at different heights, which affects how the fairing lines up with the vehicle roofline and how much airflow it can redirect.
Wind fairings are usually fitted once and left in place, so routine checks matter most. Wind loads at speed push on the clamps every mile, so recheck them after the first drive and at each fuel stop on longer trips. Look for paint rubbing at the clamp contact points, and clean grit from the bars so the clamps keep their hold.
- Measure the cross bar diameter and profile before fitting
- Check the clamps after the first drive
- Look for paint rub where the clamps touch
- Keep the bars clean so the clamps hold
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHORF4 (RF4) |
| Product type | Roof rack wind fairing |
| Length | 50 inch |
| Mounting | Universally fitting clamps to cross bars |
| Warranty stated | 5 year |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the RF4 has 42 entries, starting with 2001–2013 Acura MDX; 2007–2012 Acura RDX; 2007–2014 Audi Q7; and 39 more entries. The full list, with trim levels, appears in the Fitment tab.
The list has 42 entries, so check the Fitment tab for your exact vehicle. The fairing also needs cross bars to clamp to, and it should be matched with the cross bar size. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Roof and carrier accessories should be installed with all clamps and fasteners tightened, and rechecked after the first miles and before each trip. Stay within the load limits of the rack and the vehicle roof.
Clamp the fairing level and square across the cross bars, fully tightened, with nothing contacting the paint or glass. Check the clamps before long trips and remove the fairing if it is damaged. Keep any load carried behind it within the roof rack and roof ratings.
What’s included
One wind fairing with universally fitting clamps.
Not included: Roof rack cross bars are not included.











