Overview
The Go Rhino ORP5925002T is a rear mounting kit that lets you attach up to two 50-inch light bars to the back of a Go Rhino SRM100 Rack. It is a steel roof rack accessory, and the kit is designed to install without drilling.
The kit is for owners who already run an SRM100 Rack and want light bars mounted at the rear. No specific vehicle year, make or model is stated, so confirm your rack setup rather than relying on a model name.
Key features
- Holds up to two 50-inch light bars on the back of the SRM100 Rack
- Steel construction
- Installation does not require drilling
- Classified as a roof rack accessory
Rear mounts and cargo
A rear light mount changes how the rack carries weight and how the lights see the road behind the vehicle. Rear-facing bars are useful for reversing, camp setup and trail work, but they should be aimed so they do not blind following drivers. Set the angle once and recheck it after rough trips.
Wiring at the rear needs extra care because cables cross the tailgate or hatch area and flex every time the door moves. Leave slack at the mount, secure the cable with clips and ties, and route it so it cannot be pinched or rubbed through. Use a fuse and relay for the lights and keep the connections sealed against water.
Cargo carried on the rack should sit lower and centered when possible, and anything tied on should be checked for movement after the first stretch of road. Check the mounting bolts periodically, since vibration can loosen them over time.
Specifications
| Brand | Go Rhino |
|---|---|
| Part number | ORP5925002T |
| Material | Steel |
| Installation | Drilling not required |
| Roof rack type | Roof rack accessories |
| Light bar capacity | Up to 2 bars, 50-inch |
| Compatible rack | SRM100 Rack |
Vehicle fitment
Fit depends on the SRM100 Rack being installed on your vehicle, so confirm the rack model and mounting before choosing a mount. Confirm your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit mounts to the rear of the SRM100 Rack without drilling. Light bars are not part of this kit, so check that the bars you add match the 50-inch size. Run any light wiring through a fuse and relay, and check local rules before using lights on public roads.
What’s included
The kit covers the rear mounting hardware only, with the light bars supplied separately.
Not included: the 50-inch light bars.









