Overview
The Rhino-Rack Folding J Style Kayak Carrier Extension (S512X) adds a second kayak or canoe position to the Rhino-Rack S512 J style carrier. It attaches to one S512 carrier, so two S512 carriers and two extensions carry up to four kayaks or canoes on a roof rack crossbar that is long enough. The extension fits the Rhino-Rack Vortex crossbar with a screw-to-tighten mechanism, and fitting kits are available for Heavy Duty and Euro bars.
Key features
- Adds one more watercraft position to each S512 carrier
- Screw-to-tighten fitting for the Vortex crossbar
- Fitting kits for Heavy Duty and Euro bars, plus Rola Rack and Rola Commercial bars
- Two S512 carriers and two extensions carry up to four kayaks or canoes
Before you buy
A second kayak position only works if the crossbar and the rest of the setup can take the load. Measure the usable length of your bar before buying two carriers and two extensions, and allow space between the watercraft so the hulls do not touch. Bars that flex under weight or sit on an older roof rack may need replacing before a four boat load goes on.
Loading order matters. Put heavier boats in the centre positions where the rack is most stable, and secure each hull with straps that run under the bar rather than only around the kayak. Recheck every strap and fitting after the first short drive, because hulls can settle as the load shifts.
- Check bar length before buying parts
- Keep hulls apart at the front and rear
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Part number | RHOS512X |
| Carrier type | Folding J style kayak carrier extension |
| Works with | Rhino-Rack S512 kayak carrier |
| Crossbar fitting | Vortex bars fit directly. Heavy Duty and Euro bars use a fitting kit, and Rola Rack and Rola Commercial bars use a separate fitting kit. |
Vehicle fitment
The extension is not tied to a vehicle model, so the fit depends on the crossbar you have. Confirm fit for your vehicle’s year, model and trim before ordering.
If your crossbar is not long enough for two carriers plus two extensions, four kayaks will not fit. The paddle cradle on the S512 cannot be used while the S512X extension is fitted.
Installation notes
The extension is held to the crossbar with a screw-to-tighten mechanism. Choose the fitting kit that matches your bar before ordering.
What’s included
The S512X extension piece.
Not included: the S512 carriers, which are needed to use the extension, and the fitting kit for your crossbar type.












