Overview
The Rhino-Rack Batwing Awning, part number RHO33200, is a roof rack awning that provides 270 degrees of shade and 11 sqm of coverage for camp setups. It is an all-new design built for easy use, which suits overlanding and camping during hot summer days or rainy weather.
The Batwing is made from a heavy-duty, water and mold resistant material rated UPF 50+ for sun protection. Existing awning accessories, including side walls, extension pieces and tents, are compatible, so the shaded area can grow with your camp. It is universal fit, so it is not tied to a single vehicle.
Key features
- 270 degrees of shade and 11 sqm of coverage
- Heavy-duty water and mold resistant material
- UPF 50+ rated for sun protection
- Compatible with existing side walls, extension pieces and tents
- Poles, ropes and pegs packed in the awning bag
- Set up or packed away within minutes
- Fitting kit to help mount the awning to a roof rack
- Heavy-duty PVC bag for storage between trips
Roof rack loads and awning setup
An awning adds load to a roof rack, and that load is felt most in wind and on rough roads. The awning, its poles and its bag all count toward what the rack carries, so check the rack’s load rating before mounting. Spread heavier items evenly across the rack and keep the awning as low and centered as the rack allows.
Setup goes faster when the fitting kit and rack are checked before the trip starts. Tighten the mounts after the first drive, since vibration can loosen them. In strong wind, take the awning down rather than trying to hold it in place, and dry the canvas before packing it into the PVC bag to limit mildew.
- Check the rack’s load rating before mounting
- Tighten mounts after the first drive
- Take the awning down in strong wind
- Dry the canvas before packing it away
Specifications
| Brand | Rhino-Rack USA |
|---|---|
| Model | Batwing |
| Part number | RHO33200 |
| Shade | 270 degrees |
| Coverage | 11 sqm |
| UPF rating | UPF 50+ |
| Material | Heavy-duty water and mold resistant material |
| Included hardware | Poles, ropes, pegs and fitting kit |
| Storage | Heavy-duty PVC bag |
Vehicle fitment
It is universal fit and is not tied to a specific vehicle, model year or roof rack model. Because it mounts to a roof rack with the included fitting kit, confirm that your rack can carry an awning before you mount it.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The awning can be set up or packed away within minutes. Mounting depends on the fitting kit reaching your roof rack, so check the fit to your rack before the first trip.
What’s included
The Batwing comes with ropes, pegs and poles packed in the awning bag, plus a fitting kit for roof rack mounting and the heavy-duty PVC storage bag.









