Overview
The Recon 264272CLCC is a clear-lens projector headlight assembly with CCFL halo lighting. Recon’s copy names these as 2011–2015 Ford Super Duty projector headlights that come as a set, with 9006-style low-beam bulbs and H1-style high-beam bulbs.
The design offers higher light output than factory OEM headlights, with a wider and more usable beam pattern. The halos and DRLs use CCFL lighting.
Key features
- Clear projector headlight assembly
- CCFL halo and DRL lighting
- 40% light output improvement over factory OEM headlights.
- Wider beam pattern.
- Four standard halogen bulbs installed
Halo wiring and lens care
CCFL halo and DRL circuits draw power from the vehicle’s electrical system, so the wiring needs to be sound. Fused relay wiring keeps the halo circuit protected and takes load off the factory switch. Route the wiring away from heat and sharp edges, and secure the harness so it does not rub against the engine bay.
Clear projector lenses are more exposed to sunlight than tinted lenses, so UV protection matters. Clean the lens with mild soap and water, avoid abrasive pads, and use a headlight sealant made for clear lenses. Lenses exposed for long periods can haze or yellow, which reduces the light the lamp throws.
Check the beam pattern after installation, especially if the new headlights spread light more widely. Aim should be checked on level ground with the truck loaded normally. Keep the rear cover sealed and free of moisture to prevent condensation inside the lamp.
- Use fused relay wiring for the halo and DRL circuits
- Clean the lens with mild soap and water
- Apply a UV-protective sealant to clear lenses
- Aim the headlights on level ground after installation
- Check rear covers for moisture
Specifications
| Brand | Recon |
|---|---|
| Part number | 264272CLCC |
| Color | Clear |
| Type | Headlight assembly with halo |
| Halo technology | CCFL |
| Low-beam bulb | 9006 style, projector |
| High-beam bulb | H1 style |
| Standard bulbs installed | 4 halogen |
| Light output | 40% improvement over factory OEM |
Vehicle fitment
This assembly is designed for 2011–2015 Ford Super Duty projector headlights. Confirm fit for your truck’s model year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The low beam takes a 9006-style bulb and the high beam an H1-style bulb, so match bulb types when replacing. Use fused relay wiring for the halo and DRL circuits and follow local road-use rules for DRL and halo lighting.
What’s included
Clear projector headlight assemblies with CCFL halos and four standard halogen bulbs installed.
Not included: Upgrade bulbs are a separate purchase.













