Overview
The Recon 264195BKCC is a smoke-finish projector headlight assembly with CCFL technology, part number REC264195BKCC. Recon sells it as a set, and it uses H1 style bulbs for the projector low beam and the high beam.
Fit for 07-13 Chevrolet Silverado models is unconfirmed, because the fitment label reads Universal Fit with no make, model or years. Confirm your year, model and trim before ordering.
Key features
- CCFL technology projector design
- Smoke finish
- H1 style bulbs for projector low beam and high beam
- Halo type headlight assembly
- Four standard halogen bulbs already installed
Smoke tint and bulb care
A smoke tint darkens the lens and can reduce light output, so the headlight may look better in daylight than it performs at night. If the beam seems weak after installation, check that the lens is clean and that the bulbs are seated fully in their sockets. Tinted lenses also show scratches more clearly, which is one reason to handle them with care.
Replace halogen bulbs in matched pairs so both sides produce similar light. Avoid touching the glass with bare fingers, since skin oils cause hot spots that shorten bulb life. Keep the housing sealed during cleaning, and inspect the gasket for cracks after any washing or trail use.
- Handle halogen bulbs by the base
- Replace H1 bulbs in matched pairs
- Inspect the gasket after washing
Specifications
| Brand | Recon |
|---|---|
| Part number | REC264195BKCC |
| Product number | 264195BKCC |
| Color | Smoke |
| Technology | CCFL |
| Bulb type | H1 style, low beam and high beam |
| Bulbs included | 4 standard halogen, installed |
| Assembly type | Headlight assembly with halo |
| Fitment label | Universal Fit |
Vehicle fitment
Fit for 07-13 Chevrolet Silverado models is unconfirmed. Projector housings are sized for particular vehicles, so compare the housing with your truck before ordering.
Projector housings are sized for specific vehicles, and a Universal Fit label does not settle the match. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Replacement bulbs should be H1 style to match the projector low beam and high beam. Disconnect the battery before removing the old assembly.
What’s included
Four standard halogen bulbs come installed. Check any remaining hardware and wiring against your installation before starting.












