Overview
The Recon REC264272BKC is a smoke projector headlight assembly for the 2011–2016 Ford F-250 Super Duty and F-350 Super Duty. It is a direct-fit headlight, intended for owners replacing projector headlights on those Super Duty trucks.
Each set comes with 4 standard halogen bulbs already installed. Every projector headlight holds 2 bulbs: an H7-style bulb for the low beam and an H1-style bulb for the high beam. Owners who want a different bulb type can upgrade, but the upgrade bulb sets are needed separately.
Recon names an LED low-beam bulb as its recommended upgrade and also lists HID, DW and PB options for the low beam, plus HID, DW, PB and SY options for the high beam. Because each headlight uses both bulb types, upgrading both beams takes two bulb sets for each pair of headlights.
Key features
- Direct-fit projector headlights for 2011–2016 Ford Super Duty trucks
- Smoke finish housing
- Comes with 4 standard halogen bulbs already installed
- Low beam uses an H7-style bulb; high beam uses an H1-style bulb
- Low-beam bulb upgrades: LED (264H7LED), HID (264H7HID), DW (264H7DW), PB (264H7PB)
- High-beam bulb upgrades: HID (264H1HID), DW (264H1DW), PB (264H1PB), SY (264H1SY)
- Recon’s recommended low-beam upgrade is the LED bulb (264H7LED)
Choosing a bulb upgrade
A projector headlight works best when the bulbs and the lens are matched. If you upgrade the low beam, the bulb change affects both the cutoff and the spread of light, so check the beam pattern after installing. Upgraded bulbs can run hotter or cooler than the halogen originals, so inspect the housing for heat stress after a few drives.
Both beams can be upgraded together, but each beam needs its own bulb set. Replacing only one side can leave the two headlights looking different in color and output. Choose bulbs for the low beam first, since that beam is used most often, then decide whether the high beam needs the same change.
Keep the connectors clean and fully seated when changing bulbs. Avoid touching bulb glass with bare fingers, and use gloves or a clean cloth. Moisture or dust inside a projector housing can cloud the lens over time, so check that the rear cover is seated after any bulb change.
- Change both beams as sets for an even look
- Check the cutoff after installing new bulbs
- Keep the connectors clean and fully seated
- Handle bulb glass with gloves or a clean cloth
Specifications
| Brand | Recon |
|---|---|
| Part number | REC264272BKC |
| Type | Headlight assembly |
| Fitment type | Direct fit |
| Color | Smoke |
| Standard bulbs included | 4 halogen |
| Low-beam bulb | H7 style |
| High-beam bulb | H1 style |
| Bulbs per headlight | 2 |
Vehicle fitment
Recon lists these projector headlights for the 2011–2016 Ford F-250 Super Duty and 2011–2016 Ford F-350 Super Duty, in the King Ranch, Lariat, Platinum, XL and XLT trims.
Models and years outside this list, including other Ford trucks and other Super Duty generations, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the package contents against your installation, including wiring and mounting hardware, before starting. Aim both beams after installation.
What’s included
Recon projector headlights in smoke finish, with 4 standard halogen bulbs already installed.
Not included: The upgrade bulb sets: 264H7LED, 264H7HID, 264H7DW and 264H7PB for the low beam, and 264H1HID, 264H1DW, 264H1PB and 264H1SY for the high beam.










