Overview
The Rampage 16180 is a semi-gloss black Xtremeline step bar, sold as a pair, for full size pickups and SUVs from 1988 through 2014. It blends the styling of a side bar with the walking surface of a running board, using a 5-inch step.
The 5-inch step offers over 50% more step area than a regular tube step. Molded end caps finish each end, can be painted to match a custom look, and seal the step against moisture. The bars mount to existing factory holes on most applications, so drilling is typically not required.
Key features
- 5-inch step with over 50% more step area than regular tube steps
- Molded end caps that seal the step from moisture and accept paint
- Heavy-duty mounting brackets that attach to existing factory mounting holes
- The bar can be positioned forward or back to suit placement
- No drilling needed on most applications
- Semi-gloss black finish with an OEM-style appearance
Choosing the right setup
Because this set is sold as a pair, the most important part of the install is matching both sides. Start with the bars in the same forward or back position, then measure from a fixed point on each side so the height and angle match. A bar that sits a little higher on one side can look off and wear the bracket unevenly over time.
Wide full size trucks and SUVs have many side step options, so the choice often comes down to how the vehicle is used. A running board style bar works well for daily cab entry and light trail use, while heavier use may call for a sturdier mount or added bracing. Pay attention to the clearance under the bar on rough ground.
- Confirm the brackets for your vehicle before installation
- Set both bars to the same height and position
- Check the end caps for lifted or cracked edges
Specifications
| Brand | Rampage |
|---|---|
| Part number | 16180 |
| UPC | 873563008956 |
| Product type | Xtremeline step bar |
| Finish | Semi-gloss black |
| Length | 80 inch |
| Step width | 5-inch step |
| Length designation | Cab |
| Mounting | Heavy-duty brackets to existing factory holes |
| Quantity | Sold as a pair |
| Fit type | Direct fit |
Vehicle fitment
It is a direct fit for listed full size pickups and SUVs, including the Chevrolet Silverado 1500 (1999–2014), GMC Sierra 1500 (1999–2014), Ram 1500, 2500 and 3500 (2011–2014), Ford F-150 (2004–2013) and Toyota Tundra (2004–2013). Model years after 2014 are not covered.
Model years after 2014 for these lines are not included, and other body styles are not covered. Match your truck’s year, cab and trim to the full fitment list before selecting this set.
Installation notes
Most applications need no drilling, because the brackets attach to existing factory holes. Set the bar forward or back to the position you want before tightening every bracket fastener, then recheck the bar height on both sides. Mounting brackets are sold separately, so have the correct set for your vehicle on hand before starting.
What’s included
Two Xtremeline step bars, sold as a pair.
Not included: Mounting brackets are sold separately.












