Overview
The Rampage 78510 is a front recovery bumper with a stinger, in textured black powder coat. It is a full-width steel bumper with tapered ends for tire travel and extreme approach and departure angles.
The center stinger is 2-inch by .120 wall tubing, and the side protectors are 1.5-inch by .120 wall tubing. The bumper accepts most winches, but the mounting plate is not included.
Key features
- 2-inch center stinger, .120 wall
- 1.5-inch side protectors, .120 wall
- Tapered ends for tire travel and approach and departure angles
- Accepts most winches
- Textured black powder coat
Winch and light setup
Tapered ends help the bumper ride over obstacles and protect the tires as they travel, and they also improve approach and departure angles. The center stinger and side protectors work together, so inspect them after hard impacts for dents or cracked welds. Textured black powder coat hides small scuffs, but bare steel will rust where the finish is chipped.
Because the winch mounting plate is not included, choose a plate made for your winch model and check that it lines up with the bumper before drilling anything. The bumper has light mount provisions, but lights are sold separately, so plan your wiring and light choice early. Keep the winch line routed through the center to limit stress on the side protectors when pulling at an angle.
- Confirm winch weight against the vehicle’s rating
- Check the mounting plate bolts after the first few pulls
- Touch up chipped finish near the tapered ends
Specifications
| Brand | Rampage |
|---|---|
| Part number | 78510 |
| UPC | 873563008154 |
| Material | Steel |
| Finish | Textured black powder coat |
| Width | Full |
| Position | Front |
| Winch mount | Not included |
| Winch mounting plate | Not included |
| Light mounts | Listed in the specs; lights sold separately |
| D-ring mount | Not included |
Vehicle fitment
Check your vehicle’s year, model and trim before ordering to confirm the bumper’s application.












