Overview
The Pro Comp Alloy Wheels PXA 44 center cap, part number 504434200, is a 3.42-inch push-through center cap. It covers the hub at the center of the wheel and carries the wheel’s hub-cap design into a push-through fitting.
This cap is made for the 36 bolt code, the code used to match caps to wheels. Confirm the 36 code on your wheel before ordering.
Key features
- Push-through design
- 3.42-inch diameter
- For the 36 bolt code
Push-through caps explained
A push-through cap is pressed into the wheel center rather than screwed in. Its fit depends on the center bore and the retaining features around the edge, so a cap that looks right can still sit proud or loose if the bore is different. Measuring before fitting prevents the cap from being forced into the wrong opening.
Bolt codes help match caps to wheels, but the code is only part of the picture. Check the center bore, the cap’s edge profile and the wheel’s bolt pattern together. Any mounting hardware your installation requires should be confirmed before you start so the cap seats evenly.
- Measure the center bore before pressing in the cap
- Seat the cap evenly around the edge
- Check that the cap sits flush after installing
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 504434200 |
| UPC | 844658040670 |
| Diameter | 3.42 inches |
| Style | Push-through |
| Bolt code | 36 |
Vehicle fitment
This is a wheel center cap, not a vehicle-specific part, and no vehicle is named. Match it to the 36 bolt code and the 3.42-inch hub on your wheel.
What’s included
Check whether your installation needs any hardware beyond the cap.









