Overview
The Prothane 19-904 is a red, hour glass shock mount bushing with an outer diameter of 1.010 in., a bolt hole diameter of .750 (inches) and a width of .990 (inches). A shock mount bushing sits between a shock absorber and its mounting point and cushions the connection.
It is a universal fit. Confirm the material and the shock size it suits against your shock before fitting.
Shock bushing wear and replacement
A shock bushing takes repeated movement at each end of the shock, so it wears through small cracks, flattening or a loose fit in the mount. A worn bushing can cause a tapping or rattling sound over bumps and lets the shock move more than it should. Inspect both ends of each shock during tire rotations, and look at the rubber for splits or bulging around the bolt hole.
Replace bushings in sets on the same axle, since partly worn ones will load the new parts unevenly. Clean the mounting eye and bolt before fitting, and avoid reusing a bushing that has been compressed for long periods. Recheck the shock mounting hardware after the first drive, because the bushing can settle slightly when first loaded.
- Inspect the rubber for splits or bulging
- Replace bushings in sets
- Clean the mount before fitting
Specifications
| Brand | Prothane |
|---|---|
| Part number | 19-904 |
| UPC | 636169020056 |
| Product type | Shock mount bushing |
| Color | Red |
| Shape | Hour glass |
| Outer diameter (O.D.) | 1.010 in. |
| Bolt hole diameter | .750 (inches) |
| Width | .990 (inches) |
Vehicle fitment
It is a universal fit. Match the dimensions above to your shock mount and confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Follow the installation steps for your shock, support the vehicle on rated jack stands, and replace bushings in sets. Tighten the shock mounting hardware to the correct torque and re-check it after the first miles of driving.









