Overview
The Daystar KU08001BK is a polyurethane shock absorber bushing built around a 3/8 inch stem. It is intended as a replacement for the stem bushings on factory and aftermarket shock absorbers. It is a universal application part rather than one made for a particular vehicle, so compare the stem size and bushing style with your shock.
Shock bushings wear under constant movement. This bushing is made from a specially formulated polyurethane compound designed to hold up in harsh conditions. It is built to help control wheel hop and allow greater shock dampening, and it improves rebound efficiency. The compound is also resistant to fluid and road grime.
Key features
- Sized for a 3/8 inch stem
- Polyurethane construction
- Universal application for shock absorbers
- Built to limit wheel hop while boosting shock dampening control
- Improves dampening and rebound efficiency
- Fluid and road grime resistant
- Limited lifetime warranty
Stem bushings and shock wear
The stem bushing takes the side load where the shock body meets the mount, so a worn bushing lets the shock move in ways it was not designed to. Symptoms often include a knocking noise over bumps, uneven tire wear and a shock that feels loose at the top. Checking the bushings each time the suspension is serviced helps catch wear before the shock itself is damaged.
Replacing a stem bushing usually means clearing the mounting bolt and the seat, then fitting the new bushing without forcing it. Confirm the stem diameter and the seat depth before pressing it in, and make sure the bushing sits flat so the shock moves freely.
- Check stem bushings during suspension service
- Look for knocking over bumps
- Clean the seat before fitting
- Confirm stem diameter before pressing in
Specifications
| Brand | Daystar |
|---|---|
| UPC | 814423017091 |
| Size | 3/8 inch stem bushing |
| Material | Polyurethane |
| Application | Universal |
| Available colors | Red and black |
| Warranty | Limited lifetime |
Vehicle fitment
This bushing has no make, model or year, as it is a universal application part. Compare the 3/8 inch stem with the bushing seat on your current shock absorber to confirm the match.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package contains one shock absorber bushing. Check the contents against your installation before starting.












