Overview
The Prothane 1-1005-BL is a black polyurethane rear leaf spring bushing for the 1987–1995 Jeep Wrangler (YJ). It is a direct fit, and the kit includes the bushings, metal sleeves and a tube of synthetic grease.
The fitment section names the YJ chassis, which Jeep sold as the Wrangler from 1987 to 1995. Prothane says its polyurethane does not rot or deteriorate from oils, road salt, chemicals, ozone or smog, so the bushing should hold its firmness over time.
Key features
- Black polyurethane construction
- Rear leaf spring position
- Non-greaseable service
- Kit includes bushings, metal sleeves and synthetic grease
Rear bushing wear and fit
Rear leaf spring bushings control how the spring moves at each end, so worn ones let the axle shift and the body feel loose. On a Wrangler YJ, a squeak or clunk over bumps, a rear end that wanders, or uneven tire wear can point to worn bushings. Inspect the eyes and shackles for movement by hand while the vehicle is safely supported.
Polyurethane is firmer than rubber, so the ride is typically more direct and the bushings resist the oils and road grime found under older trucks. Because the kit is non-greaseable, the fit between sleeve and bushing matters more than lubrication, and the sleeves should slide in with light pressure. Replace the shackle bolts with the bushings if they show wear.
- Look for cracks around the bushing sleeve
- Check for play at the shackle ends
- Replace worn shackle bolts with the new set
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-1005-BL |
| UPC | 70000422540 |
| Position | Rear |
| Color | Black |
| Material | Polyurethane |
| Service | Non-greaseable |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1987–1995 Jeep Wrangler (YJ) in the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.
The fitment does not include the TJ, JK or LJ Wrangler, or any CJ model. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bushing is non-greaseable, so do not look for grease fittings. The kit’s synthetic grease is provided for proper lubrication. Safely support the vehicle on stands before starting work on the rear springs.
What’s included
The kit includes the bushings, metal sleeves and a tube of synthetic grease. All necessary hardware is included.









