Select your vehicle

Prothane Motion Control Leaf Spring Eye/Shackle Bushing Kit (Black) – 9-1001-BL

Prothane Motion Control

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Prothane Motion Control 9-1001-BL leaf spring eye and shackle bushing kit
  • Black polyurethane with non-greaseable service
  • Non-greaseable service; direct fit for the 1972–1980 International Scout II (Base, SS2, Terra, Traveler, XLC)
  • UPC 636169075742

Description

Overview

The Prothane Motion Control 9-1001-BL is a black polyurethane leaf spring eye and shackle bushing kit for the 1972–1980 International Scout II. A leaf spring eye and shackle bushing kit covers the bushings at the eye and shackle ends of a leaf spring, where the spring connects to the frame and the shackle.

Polyurethane resists oils, road salt, chemicals, and atmospheric contaminants such as ozone and smog, so the bushings are less likely to go soft over time. Soft bushings can give vague, uncertain steering and handling.

Key features

  • Polyurethane construction in black
  • Non-greaseable service
  • Direct fit for the 1972–1980 International Scout II
  • Resists oils, road salt, chemicals, ozone and smog
  • Leaf spring eye and shackle bushing kit format

Eye and shackle bushing wear

Rear spring eye and shackle bushings carry the vertical load of the spring while allowing it to flex, so they wear through movement and heat. On a Scout II the joints sit near the frame, where road grit and moisture collect. Early signs include a rear end that feels loose, clunks on rough roads, and a visible gap between the sleeve and the eye.

Polyurethane is a common choice for these joints because it holds its shape and resists the fluids often found under older vehicles. Even so, a bushing can still crack or pull out of the eye if it has been installed with a damaged sleeve. Fresh hardware and clean metal surfaces help the new set seat correctly and last longer.

  • Look for gaps between sleeve and eye
  • Listen for clunks on rough roads
  • Replace corroded shackle hardware

Specifications

Brand Prothane Motion Control
Part number 9-1001-BL
UPC 636169075742
Product type Leaf spring eye and shackle bushing kit
Material Polyurethane
Color Black
Service Non-greaseable
Fitment type Direct fit

Vehicle fitment

It fits the 1972–1980 International Scout II, covering the Base, SS2, Terra, Traveler and XLC trims.

Other International Scout generations and models are not covered. Confirm fit for your vehicle’s year, model and trim before ordering.

What’s included

It is a black polyurethane eye and shackle bushing kit. Check the package contents against your installation when it arrives.

SKU: D/I9-1001-BL Category:

Specification

Shipping weight 1.06 lbs
Package dimensions 12.00 × 6.00 × 3.00 in
brands

Fitment

VehicleYearsTrims
International Scout II1972–1980Base, SS2, Terra, Traveler, XLC

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the Prothane 9-1001-BL fit a 1972–1980 International Scout II?

Yes. It fits the 1972–1980 International Scout II in the Base, SS2, Terra, Traveler and XLC trims. Confirm your trim before ordering.

What is the part number and UPC for this Prothane bushing kit?

The part number is 9-1001-BL and the UPC is 636169075742. The brand is Prothane Motion Control. The kit is a black polyurethane leaf spring eye and shackle bushing kit with non-greaseable service.

Does this polyurethane kit need greasing?

No. The kit is non-greaseable, so it has no grease fittings to service. Check your vehicle's service information before fitting it.

Does polyurethane hold up to oils, road salt and ozone?

Polyurethane is designed to resist oils, road salt, chemicals, ozone and smog, so it holds up under those conditions. It is often chosen over rubber for eye and shackle joints because it keeps a firmer feel under load.

What is a typical sign that the eye bushing has failed?

A gap between the sleeve and the eye, a clunk over bumps, or a rear end that shifts under braking are common signs. Check each eye by hand with the vehicle supported before deciding the bushing needs replacement.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon