Overview
The Prothane 1-1003 is a red polyurethane rear leaf spring bushing for 1976–1986 Jeep CJ5 and CJ7 models and the 1981–1985 Jeep Scrambler. It is a direct fit replacement, and the kit includes the bushings, metal sleeves and a tube of synthetic grease.
Polyurethane resists oils, road salt, chemicals, ozone and smog, so the bushing stays firm rather than going soft. Worn bushings can cause a loose, uncertain feel while driving, which this material is designed to avoid.
Key features
- Red polyurethane construction
- Rear leaf spring position
- Non-greaseable design, so there are no grease fittings.
- Includes bushings, metal sleeves and synthetic grease
- Designed to resist oils, road salt, chemicals, ozone and smog
Before installing the bushings
Rear leaf spring bushings sit at the spring eye, where the spring rotates as the axle moves up and down. Over time the bushings can compress, crack or loosen in their sleeves, and the vehicle may feel vague, wander on the road or creak over bumps. Check the bushing condition and the spring eye bore while the spring is out, since a worn bore will not hold a new bushing correctly.
Polyurethane is firmer than rubber, so it transmits more vibration to the chassis, but it keeps its shape across temperature changes. Clean the bore and sleeve before pressing parts in, and avoid mixing in grease other than the synthetic grease supplied with the kit. If the shackle or mounts show wear, plan to replace them at the same time, because a new bushing will work against worn hardware.
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-1003 |
| UPC | 636169002021 |
| Position | Rear |
| Color | Red |
| Material | Polyurethane |
| Service | Non-greaseable |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976–1983 Jeep CJ5 in the Base, Golden Eagle, Laredo, Limited and Renegade trims, the 1976–1986 Jeep CJ7 in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1981–1985 Jeep Scrambler in the Base, Laredo, Renegade, SL and SR trims.
The fitment does not include the Wrangler (YJ), the Cherokee or any CJ model from 1987 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bushing is non-greaseable, so there are no grease fittings to use. The included synthetic grease is supplied for lubrication with this kit. Work on rear suspension parts only with the vehicle safely supported on stands.
What’s included
The kit includes the necessary bushings, metal sleeves and a tube of synthetic grease, along with all necessary hardware.
























