Overview
The Prothane 1-1003-BL is a black polyurethane rear leaf spring bushing for 1976–1986 Jeep CJ5 and CJ7 models and the 1981–1985 Jeep Scrambler. It is a direct fit, and the kit contains the bushings, metal sleeves and synthetic grease needed for the job.
Polyurethane does not rot or deteriorate from oils, road salt, chemicals, ozone or smog, which helps the suspension respond consistently over time.
Key features
- Black polyurethane construction
- Rear leaf spring position
- Non-greaseable design
- Kit includes bushings, metal sleeves and synthetic grease
- Built to hold up against oils, road salt, chemicals, ozone and smog
Lubrication and fit checks
Because the bushing is non-greaseable, lubrication is limited to the supplied grease at installation. Apply only that grease to the sleeve and bore, and keep it off the outside of the polyurethane where dirt can collect. A clean, dry frame bracket and a straight sleeve help the bushing seat without binding, since an uneven fit can cause early wear at one edge.
Rear springs on older CJ-series Jeeps often show rust at the mounting points, so wire-brush the brackets and check for cracks before installing. New bushings are easier to fit when the spring is supported and the shackle can move freely. Inspect the bushing after the first few drives and recheck any fasteners that were disturbed, since loose hardware is a frequent cause of noise.
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-1003-BL |
| UPC | 63616900204 |
| Position | Rear |
| Color | Black |
| Material | Polyurethane |
| Service | Non-greaseable |
| Fitment type | Direct fit |
Vehicle fitment
Fits the 1976–1983 Jeep CJ5 in the Base, Golden Eagle, Laredo, Limited and Renegade trims, the 1976–1986 Jeep CJ7 in the Base, Golden Eagle, Golden Hawk, Laredo, Limited and Renegade trims, and the 1981–1985 Jeep Scrambler in the Base, Laredo, Renegade, SL and SR trims.
The fitment does not include the Wrangler (YJ), the Cherokee or any CJ model from 1987 onward. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the bushing is non-greaseable, plan on using only the synthetic grease supplied in the kit. Lift and support the Jeep securely before removing any rear spring hardware.
What’s included
The kit contains the necessary bushings, metal sleeves and a tube of synthetic grease, and all necessary hardware is included.









