Overview
The Prothane 1-2004-BL is a complete black polyurethane bushing kit for the 1984–2001 Jeep Cherokee (XJ). It covers the front C-arm, the rear spring and shackle, the front track arm and the tie rod boots, so one box addresses several suspension pivot points on the XJ.
Polyurethane is firmer than the rubber bushings most vehicles leave the factory with. The compound is designed for durability, maximum performance and handling, and the kit is a direct replacement for the original parts.
Key features
- Front C-arm, rear spring and shackle, front track arm and tie rod boot positions in one kit
- Black polyurethane construction
- Direct fit design for the XJ.
- Fits the 1984–2001 Jeep Cherokee (XJ) trims named in the fitment section below
Bushing replacement basics
Control arm and spring bushings are pressed into the arm or frame, so the old bushing has to be driven out and the new one pressed in square. Alignment of the press and sleeve matters, because a crooked bushing can bind or wear unevenly. Many owners use a shop press or a press kit with adapters for this work.
Replacing bushings is a good time to inspect the C-arm, track arm and spring hangers for cracks, bent metal and loose welds. Check the tie rod boots for tears and look at the steering linkage while the vehicle is on stands. Re-check fasteners and alignment after the first drives, since polyurethane parts can settle.
- Clean the bores before pressing new bushings
- Lubricate polyurethane bushings as the kit allows
- Inspect arms and hangers for cracks
- Tighten fasteners with the vehicle at ride height
Specifications
| Brand | Prothane Motion Control |
|---|---|
| Part number | 1-2004-BL |
| UPC | 636169003363 |
| Color | Black |
| Material | Polyurethane |
| Fitment type | Direct fit |
| Kit contents | Front C-arm, rear spring and shackle, front track arm, tie rod boots |
Vehicle fitment
The kit fits the 1984–2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
Other years and Jeep models are not covered. Match your year, model and trim to the kit before ordering.
Installation notes
Replacing C-arm, track arm and spring bushings usually means pressing out the old bushings, so a shop press or bushing press kit is needed. Support the vehicle on jack stands before working under it.
What’s included
The kit covers the front C-arm, rear spring and shackle, front track arm and tie rod boot bushings. Check the package contents against your installation before starting, including any hardware, sleeves and tools the job needs.









