Overview
The Energy Suspension 2.18105R is a red Hyper-Flex polyurethane bushing kit for the 1984–2001 Jeep Cherokee (XJ). It covers the front control arm bushings, rear spring and shackle bushings and front track rod bushing, and includes tie rod end boots.
The Hyper-Flex line is designed to improve handling, performance, control and durability on suspension components such as control arms, traction bars and leaf springs. This kit covers a partial set of bushings and includes no body mounts.
Key features
- Two front control arm bushings (2)
- Rear spring and shackle bushings
- Front track rod bushing
- Tie rod end boots
- It fits 1984–2001 Jeep Cherokee (XJ) trims, including Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport.
Before you press in bushings
Polyurethane control arm bushings stay firmer than rubber, which means more of the suspension’s movement passes through the arm rather than being absorbed by the bushing. Drivers often notice sharper steering response and less body roll on pavement, though the stiffer material also carries more road noise and vibration into the cabin. Off road, the same firmness helps keep the axle location steady on rough climbs, but it leaves less give for small impacts.
Before ordering, look at the rest of the front end. Ball joints, tie rod ends and track rod ends that are worn or loose will undermine a bushing upgrade, so inspect them while the arms are off. Bushing kits often go in with new sway bar links or a fresh track rod. When installing, grease the polyurethane parts as the instructions direct and recheck torque on all fasteners after the first few drives.
Specifications
| Brand | Energy Suspension |
|---|---|
| Product line | Hyper-Flex System |
| Part number | 2.18105R |
| UPC | 703639259718 |
| Color | Red |
| Material | Polyurethane |
| Fitment type | Direct fit |
| Front control arm bushings | 2 |
| Other bushings | Rear spring and shackle, front track rod, tie rod end boots |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee (XJ) in Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims.
Years outside 1984–2001 and Jeep models other than the Cherokee XJ fall outside this kit’s coverage. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
Control arm and track rod bushings typically require pressing out the old parts, so a shop press or a bushing tool kit is useful. Set the vehicle on stands before going under it.
What’s included
The kit includes two front control arm bushings, rear spring and shackle bushings, a front track rod bushing and tie rod end boots. Check the package contents against your installation before starting.









