Overview
The Pro Comp Alloy Wheels center cap, part number 1425017, is a flat black cap measuring 4.25 inches. It carries the Pro Comp logo and fits wheels with 5 x 5.5 and 6 x 5.5 inch bolt patterns.
It replaces a missing or damaged wheel accessory. Measure your wheel’s bolt pattern and center bore before ordering.
Key features
- Flat black finish
- 4.25-inch diameter
- Pro Comp logo
Keeping caps secure on trails
Flat black caps are usually chosen for a low-key look that suits steel and alloy wheels alike. The matte surface hides light scuffs but shows dirt in the grooves, so a soft brush and mild soap keep it looking even. Avoid harsh solvents, which can dull the finish over time.
Smaller center caps sit closer to the hub and can work loose from vibration on rough terrain. After the first few trail runs, press the cap by hand and check for play. Replace it if it moves at all, since a loose cap can be lost on the next rocky section.
Pay attention to the center bore and bolt pattern before any wheel swap, since mismatched caps can crack or sit unevenly. When rotating wheels between axles, keep each cap with its original wheel so it continues to match the bore.
Specifications
| Brand | Pro Comp Alloy Wheels |
|---|---|
| Part number | 1425017 |
| UPC | 844658031494 |
| Finish | Flat black |
| Diameter | 4.25 inches |
| Bolt patterns | 5 x 5.5 and 6 x 5.5 inches |
Vehicle fitment
This cap is not tied to a specific vehicle. Check the bolt pattern on your wheel against 5 x 5.5 and 6 x 5.5 inches before buying.
What’s included
One center cap is described. No package quantity is given.




















