Overview
The Pro Comp Suspension PC32003-1 is an Accu Pro speedometer and odometer calibrator. It corrects speed and odometer readings after larger tires or different gears are installed, and it can read trouble codes.
Key features
- Adjusts the speedometer for larger or smaller tire sizes
- Adjusts for gear changes
- Reads trouble codes
Reading after a tire change
A speedometer reads from wheel speed, so a larger tire turns fewer times per mile and the display reads low. Gear changes alter the same relationship. A calibrator adjusts the signal so the speed and distance readings match what the vehicle actually covers.
Before setting it, measure the new tire’s rolling size as closely as you can and confirm the gear ratio. Small errors in these inputs carry through to every speed and mileage reading, so take a few measurements rather than relying on the size printed on the sidewall alone.
Trouble code reading is useful after a change to the drivetrain or wiring. Clear codes only after the cause is fixed, and recheck the calibrated speed against a GPS or a second reference once the vehicle is back on the road.
- Measure the new tire’s rolling size
- Confirm the gear ratio before calibrating
- Check the reading against a GPS app
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PC32003-1 |
| UPC | 614901117387 |
| Tire size, adjusts up to | 44 in |
| Tire size, adjusts down to | 22.5 in |
| Gear changes | Adjustable |
| Trouble codes | Reads |
| CARB EO number | D-260-22 |
Vehicle fitment
It is a direct fit. Fit depends on your vehicle’s year, model and trim, and the calibration depends on the tire size and gearing you run, so verify those before ordering.
It is legal in California only for racing vehicles that may never be used on a highway.
What’s included
One speedometer and odometer calibrator.








