Overview
The Hypertech 752503 is a speedometer and odometer recalibration programmer that corrects readings for non-stock tire sizes. It adjusts for tires up to 44 inches and down to 22.5 inches, but it does not adjust for gear changes.
It reads trouble codes and is upgradable. The general description also mentions gear changes, so confirm that point before ordering if you have changed your rear gears.
Key features
- Adjusts for tire sizes up to 44 inches
- Adjusts for tire sizes down to 22.5 inches
- Reads trouble codes
- Upgradable
- Does not adjust for gear changes
Tire size and gear changes
Speedometer correction depends on two separate things: tire diameter and final drive ratio. A programmer that corrects tire size will not fix a gear change, so a truck with both changes needs the gear effect handled another way. Measure the tires you run before setting the correction, and treat rotation or a new tire size as a reason to recheck.
Tire sizing changes are common with off-road tires, and the speedometer error grows as the diameter moves further from stock. Look at the tire height before deciding what range you need. Keep a record of the setting used so a later tire swap can be corrected quickly, and verify speed against GPS after the first drive.
- Measure the actual rolling diameter of the tires
- Recheck after tire rotations
- Handle gear changes separately from tire changes
Specifications
| Brand | Hypertech |
|---|---|
| Part number | 752503 |
| UPC | 759609048578 |
| Tire size up to | 44 inches |
| Tire size down to | 22.5 inches |
| Gear change adjustment | No |
| Reads trouble codes | Yes |
| Upgradable | Yes |
Vehicle fitment
Tire size and rear gear setup on your vehicle decide whether the adjustment range suits it.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Confirm what comes in the box before installation, and set aside any spare hardware for review.








