Overview
The Pro Comp PC52001-1 is an electronic calibration tool for speedometer and odometer readings, sized for tires from 22.5 inches up to 44 inches. It is a plug-and-play tool for 3.8L and 3.6L engines, and it can be updated over the internet through a USB cable.
It fits 2007 to 2009 Chrysler Aspen models, 2005 to 2006 and 2008 to 2010 Dodge Dakota models, 2004 to 2009 and 2011 to 2013 Dodge Durango models, 2002 to 2010 and 2011 to 2015 Ram 1500 models, 2003 to 2009 and 2011 to 2015 Ram 2500 models, and 2003 to 2009 Ram 3500 models.
Key features
- Gear ratios adjustable up to 5.13 gears
- Adjusts for tire sizes down to 22.5 inches and up to 44 inches
- Reads and clears DTC trouble codes
- Internet updatable via USB cable
- Plug-and-play installation
Engine and gear setup
Electronic calibration tools work by changing how the speed signal is interpreted, so the settings must match the engine and drivetrain they are installed on. Engine family matters because the speed signal and the gear ratio interact with the powertrain’s programming. Before setup, confirm the engine size, the axle ratio and the tire diameter, and enter them in order so the readings track real speed.
A gear ratio set in the tool needs to match the axle the truck actually runs, so any re-gear should prompt a new setup. Tire size should be measured under load rather than taken from the sidewall, since loaded diameter is what the truck travels on. Keep a written record of the settings so they can be reproduced after a battery disconnect or a service visit.
- Confirm engine size before setup
- Measure tire diameter under load
- Record the final settings for later service
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | PC52001-1 |
| UPC | 614901117479 |
| Engine compatibility | 3.8L and 3.6L |
| Gear ratio range | Adjustable up to 5.13 gears |
| Tire size range | 22.5 inches to 44 inches |
| Diagnostics | Reads and clears DTC codes |
| Updates | Internet, USB cable |
| CARB EO number | D-260-22 |
| Legal use | California racing vehicles only |
Vehicle fitment
It fits the Chrysler Aspen, Dodge Dakota, Dodge Durango, Dodge Ram 1500, 2500 and 3500, Jeep Commander and Grand Cherokee models, and 2007 to 2015 and 2018 Jeep Wrangler JK models. The Ram 1500 and 2500 fit 2011 to 2015 model years as well as the earlier years.
Check your truck’s year, model, trim and engine size before buying, especially for 2016 and newer trucks and Jeep JL models.
Installation notes
It installs as plug-and-play. Set the gear ratio and tire size before driving, and use the USB cable for internet updates.
What’s included
One electronic calibration tool with its USB update cable.









