Select your vehicle

Hypertech Speedometer/Odometer Recalibration Programmer – 732501

Hypertech

$219.60In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 12:40 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Hypertech 732501 speedometer and odometer recalibration programmer
  • Corrects for tire sizes from 24 to 54 inches in 1/4 inch steps
  • Gear correction for ratios from 2.56 to 5.13
  • Returns to stock settings and reads and clears trouble codes
  • Internet updatable to a Max Energy Power Programmer

Description

Overview

The Hypertech 732501 is a speedometer and odometer recalibration programmer that corrects displayed speed and mileage when tire sizes or rear-end gear ratios differ from stock. It keeps the gauges in line with actual distance traveled, and accurate odometer readings are required by law.

It suits owners who have fitted larger or smaller tires or changed the rear gears. Confirm fit for your vehicle’s year, model and trim before ordering.

Key features

  • Corrects speedometer and odometer for tire sizes from 24 to 54 inches in 1/4 inch increments
  • Gear correction for 2.56, 2.73, 3.08, 3.23, 3.42, 3.73, 4.10, 4.56, 4.88 and 5.13 ratios
  • Return to stock setting restores factory calibration
  • Reads and clears diagnostic trouble codes
  • Internet updatable to a full function Max Energy Power Programmer

Tire and gear changes

Speedometer error grows with the difference between the tire or gear you fitted and the factory setup. A larger tire travels farther per revolution, so the gauge reads low and the odometer counts too slowly. A numerically higher gear ratio spins the speedometer signal faster for the same road speed. Working out which change you have made is the first step before setting any correction.

Tire measurement matters. The rolling diameter of a loaded tire is often different from the marked size, and tread wear and inflation pressure both change it. Measure the tire under load and note the rear gear ratio from the axle tag or the build records. After a tire or gear change, check the speedometer against a known reference and re-check the setting whenever the tire is replaced.

  • Measure the loaded rolling diameter of the tire
  • Note the rear gear ratio from the axle tag
  • Record the existing setting before changing it
  • Check readings at several speeds after adjusting

Specifications

Brand Hypertech
Part number 732501
UPC 759609048509
Tire size correction 24 to 54 inches, 1/4 inch increments
Gear ratios supported 2.56, 2.73, 3.08, 3.23, 3.42, 3.73, 4.10, 4.56, 4.88, 5.13

Vehicle fitment

No vehicles or model years are named for this programmer, and it is not sized to one model. Fitment depends on the tire size and gear ratio on your vehicle, so compare those figures with the ranges in the table.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

Check the package contents against your installation before starting, including any harnesses or hardware your install needs.

SKU: HYP732501 Category:

Specification

Shipping weight 0.95 lbs
Package dimensions 8.80 × 5.30 × 2.30 in
brands

Questions & Answers

What is the Hypertech 732501 speedometer programmer?

It is a speedometer and odometer recalibration programmer from Hypertech. It corrects readings for non-stock tire sizes and non-stock rear-end gear ratios, can return the vehicle to stock settings, and reads and clears diagnostic trouble codes.

Which tire sizes and gear ratios are covered?

Tire sizes from 24 to 54 inches in 1/4 inch increments are covered. Gear ratios covered are 2.56, 2.73, 3.08, 3.23, 3.42, 3.73, 4.10, 4.56, 4.88 and 5.13. Confirm your tire size and gear ratio fall within these ranges before ordering.

Does it fit a specific vehicle?

No vehicles or model years are named. The programmer works from tire size and gear ratio rather than a model, so check your own tire and gear figures against the stated ranges and confirm your year, model and trim.

Does the programmer need to be adjusted after a tire change?

Yes. Whenever tire size or gear ratio changes, set the programmer to match the new figures so the speedometer and odometer stay accurate.

Can it be used to read trouble codes?

Yes, it reads and clears diagnostic trouble codes. Clearing codes removes stored information, so note any codes before clearing them when a fault needs follow-up.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon