Overview
The Power Stop Z36-1012 is a rear metallic Z36 Truck and Tow disc brake pad set for the 2004-2011 Ford F-150 and 2006-2008 Lincoln Mark LT.
Z36 Truck and Tow pads use a metallic formula for trucks and SUVs that carry higher gross vehicle weights. The pad bite is extreme and designed to help avoid high temperature brake fade.
Key features
- Metallic pad for trucks and SUVs with higher gross vehicle weights
- Made for driving in the hills, hauling loads and towing trailers
- Extreme pad bite to avoid high temperature brake fade
- Coefficient of friction 17 percent higher than OE pads
- Thermal scorched, chamfered and slotted like OE
- Powdercoated backing plate
- Noise insulating shims
- Hi-Temp lubricant included
Before towing with metallic pads
Metallic friction material holds its grip as brakes heat up, which is why it suits loaded trucks on long grades. It can also run a little louder and produce more dust than ceramic compounds, so a short bedding-in run of moderate stops is worth doing before the first heavy load.
Pads wear faster when a truck tows or works in hilly country, so inspect the lining at every tire rotation. Uneven wear, a pulsing pedal or a squeal that stays after the shims settle are signs the pads or rotors need attention. A grooved or discolored rotor should be measured before new pads go on.
- Replace rear pads as a pair on the same axle
- Check rotor thickness and runout before fitting
- Keep brake fluid clean and at the reservoir mark
Specifications
| Brand | Power Stop |
|---|---|
| Part number | Z36-1012 |
| UPC | 792088516060 |
| Product type | Disc brake pads |
| Position | Rear |
| Series | Z36 Truck and Tow |
| Friction material | Metallic |
| Friction coefficient | 17 percent higher than OE pads |
| Backing plate | Powdercoated |
| Caliper | Stock |
| Fit type | Direct fit |
| Pad type | Upgrade |
Vehicle fitment
The Z36-1012 fits the rear axle of the 2004-2011 Ford F-150 and the 2006-2008 Lincoln Mark LT.
The F-150 is listed through 2011 only, and this rear pad is not shown for the Super Duty trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
No caliper change is listed: the pads are direct fit with stock calipers. Use the Hi-Temp lubricant and shims supplied with the set, and road-test the brakes unloaded before towing or hauling.
What’s included
A set of Z36 Truck and Tow pads, plus noise insulating shims and Hi-Temp lubricant.
Not included: Rotors are not included, so check yours for wear when changing pads.









