Overview
The Power Stop Z23-632 is a front Z23 Evolution Sport brake pad set for the 1994–1996 Ford Bronco and the 1994–1996 Ford F-150.
It is built for drivers who want more from their brakes while keeping everyday drivability. This front pad uses carbon fiber and ceramic friction material.
Key features
- Carbon fiber and ceramic formula
- Fade resistance beyond OEM pad temperatures
- Thermal scorched surface
- Chamfered and slotted like OE
- Powdercoated backing plate
- Noise-insulating shims
- Hi-temp lubricant included
- Stainless steel hardware kit included where applicable
Owning an older Bronco or F-150
Trucks and SUVs from the mid-1990s often have original hardware, aging rubber lines and years of corrosion on the caliper mounts, so a pad change is a good time to inspect the full front brake system. A carbon fiber and ceramic compound is designed to hold friction steadily as brakes heat up, but it needs a sound rotor and a caliper that releases fully. Check each caliper slide for free movement before fitting the new pads, and replace any pins that are seized or badly corroded.
Brake fluid should be checked during service, since moisture in old fluid can soften the pedal under hard stops. Inspect flexible hoses for cracking and swelling, and look for leaks at the caliper and wheel cylinder connections. Once the job is complete, make several moderate stops to bed the pads in, then recheck the pedal feel and listen for any new noise over the next few drives.
- Check caliper slide pins for free movement
- Inspect rubber hoses for cracks and swelling
- Replace fluid when it is old or dark
Specifications
| Brand | Power Stop |
|---|---|
| Part number | Z23-632 |
| UPC | 792088837080 |
| Product line | Z23 Evolution Sport |
| Product type | Disc brake pads |
| Position | Front |
| Caliper | Stock |
| Fitment type | Direct fit |
| Type | Upgrade |
| Friction material | Carbon fiber and ceramic |
| Surface | Thermal scorched, chamfered and slotted like OE |
| Backing plate | Powdercoated |
| Shims | Noise insulating |
| Lubricant | Hi-temp ceramic brake lubricant included |
| Hardware | Stainless steel hardware kit included where applicable |
Vehicle fitment
It fits the 1994–1996 Ford Bronco and the 1994–1996 Ford F-150.
Model years before 1994 and after 1996 are not covered, and later F-150 trucks need a different pad. Confirm your vehicle’s year, model and trim before ordering.
What’s included
- Power Stop Z23-632 brake pads, front position
- Ceramic brake lubricant
- Stainless steel hardware kit, where applicable









