Overview
The Power Stop S4730 is a front pair of powder-coated performance brake calipers with brackets for the heavy-duty Chevrolet Silverado 2500 HD and 3500, GMC Sierra 2500 HD and 3500, Suburban 2500, Yukon XL 2500 and Hummer H2 listed below. The set contains one left and one right caliper.
These calipers bolt in place of the stock front calipers. The calipers and brackets are remanufactured in the USA and finished in a red powder coat rated for high temperatures. Each unit has new premium boots and seals, and the caliper pins are lubricated with high-temperature silicone for long service life. Heavy-duty trucks load their front brakes heavily, so a sticking or leaking caliper shows up quickly as a pull or uneven pad wear.
Key features
- Front pair, left and right calipers
- Calipers listed with brackets
- Direct bolt-in for the stock calipers
- Remanufactured in the USA
- Red high-temperature powder coat
- New premium boots and seals
- High-temperature silicone on the caliper pins
- Premium abutment clips where applicable
Choosing the right setup
A caliper on a heavy-duty truck clamps a large pad against the rotor under loads that a half-ton never sees, so the pair works hardest when the vehicle is towing, hauling or carrying a plow. Before fitting, look at the pad and rotor pairing. Caliper pistons and pins should move freely, and a pad that wears unevenly on one side usually points to a stuck piston or a pin that needs cleaning rather than a worn pad alone.
Brakes on these trucks are often replaced in sets. Hoses that have aged, rotors near their minimum thickness and worn pads are common companions to new calipers, and replacing them at the same time keeps the system balanced. Check the brake fluid for moisture as well, because fluid that has absorbed water can reduce braking performance under repeated heavy stops.
Specifications
| Brand | Power Stop |
|---|---|
| Part number | S4730 |
| UPC | 792088929860 |
| Part type | Performance brake calipers with brackets |
| Position | Front |
| Set contents | 1 left caliper and 1 right caliper |
| Finish | High-temperature red powder coat |
| Remanufactured in | USA |
| Fit type | Direct fit |
Vehicle fitment
It fits the 2002–2006 Chevrolet Avalanche 2500; 2001–2003 and 2005–2006 Silverado 1500 HD; 2007 Silverado 1500 HD Classic; 1999–2004 Silverado 2500; 2001–2010 Silverado 2500 HD; 2007 Silverado 2500 HD Classic; 2004–2006 Silverado 3500; 2007 Silverado 3500 Classic; 2008–2010 Silverado 3500 HD; 2000–2013 Suburban 2500; 2001–2003 and 2005–2006 GMC Sierra 1500 HD; 2007 Sierra 1500 HD Classic; 1999–2004 Sierra 2500; 2001–2010 Sierra 2500 HD; 2007 Sierra 2500 HD Classic; 2004–2006 Sierra 3500; 2007 Sierra 3500 Classic; 2007–2010 Sierra 3500 HD; 2000–2013 Yukon XL 2500; and 2003–2009 Hummer H2.
The list is limited to heavy-duty and 2500-series entries, so half-ton Silverado 1500 and Sierra 1500 models are not covered here, apart from the HD variants named. Check model, class and year together. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The calipers bolt in place of the stock units. Because these are heavy-duty trucks, inspect the rotors, pads and brake hoses while the system is open. Bleed the brakes afterward and confirm a firm pedal before driving.
What’s included
- Front left caliper and front right caliper
- Brackets included with the set
- New premium boots and seals
- High-temperature silicone for the caliper pins
- Premium abutment clips where applicable
Not included: pads, rotors, brake fluid and any mounting hardware not named above.









