Overview
The Power Stop Autospecialty B76 is a set of front drum brake shoes for early Willys and Jeep vehicles, including the 1943-1949 CJ-2, 1949-1953 CJ-3, 1950-1952 M38, 1952-1953 M38A1 and 1942 Willys MB. It covers fourteen Willys applications from 1942 to 1953.
The shoes use a semi-metallic formula that is post-cured for increased braking power and a shorter break-in. They are bolt-on ready with no modifications needed. The B76 is a front shoe for the older Willys brake layout, so it suits restorations of the models named below.
Key features
- Front drum brake shoes
- Semi-metallic formula, post-cured
- 100% asbestos-free and copper-free
- New steel with a coating to resist rust
- Precision cam ground for proper drum fitment
- Chamfered to prevent noise and chatter
- Bolt-on ready with no modifications
Checking drums and adjusting shoes
Drum brake shoes work against the inside of the drum, so the condition of the drum matters as much as the shoe. Before fitting new shoes, inspect the drum for scoring, cracks and an out-of-round surface, and have it machined or replaced if it is worn beyond its limit. A worn drum can stop a new shoe from seating properly and can shorten its service life.
Semi-metallic friction material generally bites harder when cold than organic compounds do, and it can be harder on drums during a break-in period. Keep speeds moderate for the first stops and let the brakes cool between hard applications. Adjust the star wheel or self-adjuster so the shoes clear the drum evenly, and check that the hold-down springs and return springs are in good shape.
- Replace shoes in pairs on each axle
- Clean the backing plate and wheel cylinder area before assembly
- Check the wheel cylinder for leaks
Specifications
| Brand | Power Stop |
|---|---|
| Part number | PSTB76 |
| Part type | Brake shoes (Autospecialty) |
| Position | Front |
| Friction material | Semi-metallic, post-cured |
| Shoe material | New steel, coated against rust |
| Asbestos / copper | Asbestos-free and copper-free |
| Fit type | Direct fit |
Vehicle fitment
It fits the 1943-1949 Willys CJ-2, 1949-1953 CJ-3, 1950-1952 M38, 1952-1953 M38A1, 1942 Willys MB, 1948-1952 Jeepster, 1947-1953 Willys Truck and 1-Ton, 1946-1950 Panel, 1951-1953 Sedan Delivery, 1947-1950 Willys 463, 1951-1952 Willys 473, 1951 FJ and 1950 Base. It is made for the front brakes only. Confirm fit for your vehicle’s year, model and trim before ordering.
Later CJ-5 and CJ-7 Jeeps are not in this list, and this entry is for the front brakes only. Confirm your vehicle’s year, model and trim before ordering.
What’s included
Front brake shoes.









