Overview
The Painless Wiring 70903 is a black split braided sleeve that is 3/4 inch in diameter and 6 feet long. It protects a harness and tidies the wiring, and its laterally split design closes around the wire bundle without taping or fasteners. It is a universal fit, so no vehicle is named.
The sleeve is available in black only. Check that your wire bundle fits within the 3/4 inch diameter before cutting the sleeve to length.
Key features
- 3/4 inch diameter
- 6 feet long
- Laterally split design
- No taping or fasteners needed
- Black braided sleeve that protects a harness
Cutting and fitting sleeve length
A six-foot length gives plenty of room for a harness run, but it is worth planning the cuts before opening the package. Lay the wires out, measure each run, and mark the sleeve where it needs to stop. Cutting a little long is usually easier to manage than cutting short, since frayed ends can be trimmed once the wires are in place.
Once cut, the sleeve should close easily around the bundle along its split. If it fits too tightly, the bundle may need to be separated, and if it sits loose, the wires can move inside it. Check the fit at every bend before finishing the run.
- Lay out wires before measuring the sleeve
- Trim frayed ends after the bundle is in place
Specifications
| Brand | Painless Wiring |
|---|---|
| Part number | 70903 |
| UPC | 749823709034 |
| Type | Split braided sleeving |
| Diameter | 3/4 inch |
| Length | 6 feet |
| Color | Black |
Vehicle fitment
Being a sleeve rather than a vehicle part, this item is universal fit and names no vehicle. Choose it by bundle size.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Open the split, wrap the sleeve around the harness, and let it close. No tape or fasteners are needed.
What’s included
Only the braided sleeve is described, with no tape, fasteners or harness included.














