Overview
The Painless Wiring 80107 is a 10 amp single circuit breaker with a push-in style and manual reset, sold under part number 80107. It is made to work with Painless Protected Switch Panels.
Key features
- 10 amp rating
- Push-in style
- Manual reset
- Fits all Painless Protected Switch Panels
- Single circuit breaker type
Breaker care and sizing
A circuit breaker protects the wire behind it by opening the circuit when current runs too high. Resettable breakers like this one save replacing fuses after an overload, but a breaker that trips repeatedly is signaling a problem. Look for a shorted accessory, a pinched wire or a loose connection before pushing the breaker back in. Repeated trips can also weaken the internal contacts over time.
Sizing matters in both directions. A breaker rated too high lets the wire overheat before it trips, while one rated too low trips during normal use. Match the rating to the wire gauge and the accessory’s draw. Breakers are usually replaced together with the wire they protect, and the panel’s terminal connections deserve a look during any upgrade.
- Check terminal screws for looseness during routine inspection
- Replace a breaker that feels warm or has discolored housing
- Label each circuit so a tripped breaker is easy to find
- Keep wire routing clear of sharp edges and heat sources
Specifications
| Brand | Painless Wiring |
|---|---|
| Part number | 80107 |
| UPC | 70000458123 |
| Amperage | 10 amps |
| Type | Circuit breaker (single) |
| Style | Push-in |
| Reset | Manual reset |
| Compatibility | Fits all Painless Protected Switch Panels |
Vehicle fitment
This breaker is a general component rather than a vehicle-specific part. Confirm your panel is a Painless Protected Switch Panel before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the breaker’s 10 amp rating to the wiring of the circuit before installing it in a compatible panel.
What’s included
Look over the contents before starting the installation. Not included: A compatible Painless Protected Switch Panel is needed to mount this breaker.









