Overview
The Oracle Lighting 5769-004 is a 7-inch high powered LED headlight with a green halo, made as a replacement for 7-inch sealed beam lamps. It suits off-road vehicles, buggies and classic vehicles and is not tied to a particular make, model or year.
The rugged housing is built for those vehicles, and installation uses the included plug and play connectors. The set also includes H13 plugs with built-in warning cancelers. A 2-year replacement warranty comes with the headlight.
Key features
- 7-inch high powered LED headlight with green halo
- Replacement for vehicles with 7-inch sealed beam lamps
- Plug and play H4 and H13 connectors
- Set of H13 plugs with built-in warning cancelers
- Rugged design that Oracle describes for off-road use
Sealed beam swap basics
A sealed beam lamp is a single sealed unit with the lens, reflector and filament built together, so the housing sets the beam. An LED headlight replaces that unit with a separate light source, and the mounting ring, depth and bezel shape decide whether it seats cleanly. Measure the opening, the mounting ears and the clearance behind the lamp before ordering, since a deeper LED housing can clash with a hood latch or fender liner.
Once the new lamp is mounted, aim the beams on level ground and recheck the aim after any bumper, suspension or lift change. Use the fused relay for power so the wiring carries current without loading the factory switch. Clean the lens regularly, because dust and trail spray reduce output more than most owners expect.
- Check mounting ring diameter before ordering
- Route harness away from heat and moving parts
- Keep the warning canceler plugs seated
- Aim again after the first trail outing
Specifications
| Brand | Oracle Lighting |
|---|---|
| Part number | 5769-004 |
| UPC | 576900420144 |
| Size | 7-inch |
| Halo color | Green |
| Product type | Headlight assembly with halo, LED |
| Connectors | H4 and H13 plug and play |
| Warranty | 2-year replacement warranty. |
Vehicle fitment
No specific vehicle is named, so the lamp size is the main fitment check. Measure your existing sealed beam lamp and compare it with the headlight before ordering. Match the year, model and trim to your vehicle before buying.
Measure your existing sealed beam lamp and compare it with the headlight before ordering. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The set includes H13 plugs with built-in warning cancelers alongside the plug and play connectors. Wire the LED headlight through a fused relay.
What’s included
Included: plug and play H4 and H13 connectors and a set of H13 plugs with built-in warning cancelers. Check the package contents against your installation before starting, including any mounting parts you need.









