Overview
The Omix-ADA 17732.12 is a steel tank fuel line sold as an OE replacement for the fuel sender to fuel pump run of the 1976-1981 Jeep CJ5. Omix-ADA builds it to original specifications.
It carries fuel from the fuel sender to the fuel pump. It is a steel stock replacement with a direct fit, built for 304-401 V8 engines.
Key features
- Direct fit OE replacement built to original specifications
- Steel construction
- Tank to pump fuel line position
- Noted for 304-401 V8 engines
Matching the original routing
Returning to stock routing is the main goal with a tank to pump line. The line should follow the same path, sit in the same clips, and clear the same frame and body points as the one it replaces. Small differences in bend angle can put stress on a fitting, and that stress often shows up as a seep weeks later. Before you disconnect anything, photograph the original run from several angles so you can compare it with the new line during fitting.
Old fuel lines often reveal their condition once removed. Look for stiffness, cracking at the ends, a flattened section, or a crust at the fittings. Those are reasons to replace clamps and grommets along with the line. Work with the fuel system depressurized, keep the area clean, and cap open fittings so dirt does not enter the pump side.
- Photograph the original run before removal
- Replace clamps and grommets that look hardened
- Cap open fittings to keep debris out of the system
- Compare bend angles against the old line before fitting
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17732.12 |
| UPC | 804314160838 |
| Position | Fuel sender to fuel pump |
| Type | Stock replacement |
| Material | Steel |
| Engine | 304-401 V8 engines |
| Fitment type | Direct fit |
Vehicle fitment
It fits the 1976-1981 Jeep CJ5 in Base, Golden Eagle, Laredo and Renegade trims.
CJ5 models outside 1976-1981 and CJ7 models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Fuel lines carry pressurized gasoline, so depressurize the fuel system and disconnect the battery before replacing a line.









