Overview
The Omix-ADA 17732.08 is a 1-piece tank to pump fuel line for the 1976–1979 Jeep CJ7 with a 258 6-cylinder engine. It runs between the fuel tank and the fuel pump and fits the Base, Golden Eagle and Renegade trims.
The stated size is a 5/16 inch fuel line, so compare the size and routing against the line it replaces before installation.
Key features
- 1-piece design
- Routes fuel from the tank to the pump
- 5/16 inch fuel line size
- Fits the 258 6-cylinder engine
Tank to pump line care
A tank to pump line works under steady supply pressure and sees the same road spray and vibration as other underbody parts. Inspect the steel where it runs along the frame or crosses the floor pan area for surface rust, dents, or spots worn through a protective coating. Pay attention to the bends near the pump, since they flex more than straight runs. A small pinhole can leak fuel slowly, so a smell after parking is worth investigating.
When replacing the line, compare its diameter and routing with the old line before cutting or bending anything. Replace the clamps at each end and any grommets along the path, because worn clamps let the line move and rub. Keep the work area away from open flame and sparks, and confirm there are no leaks before lowering the vehicle.
- Check bends near the pump for stress marks
- Inspect frame contact points for rubbing
- Replace worn clamps at each end
- Confirm no leaks before lowering the vehicle
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 17732.08 |
| UPC | 804314160791 |
| Line size | 5/16 inch |
| Routing | Tank to pump |
| Construction | 1-piece |
| Material | Steel |
| Type | Stock replacement |
| Fitment designation | Direct fit |
Vehicle fitment
It fits the 1976–1979 Jeep CJ7 in Base, Golden Eagle and Renegade trims.
Model years 1980 and later are not on this list. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The item is one tank to pump fuel line. Check clamps and connectors against your installation before starting.









