Overview
The Jeep 52100167AB is a steel fuel line bundle and a genuine Mopar stock replacement for 4 or 6 cylinder engines with a 19 gallon fuel tank. It is a direct fit replacement.
Replacing a fuel line set
A fuel line set moves fuel from the tank to the engine, so line condition affects both flow and safety. Steel lines resist heat and abrasion well, but they can corrode at seams, bends and clamp points. Before replacing a set, inspect the old lines along their full length, including where they pass near the frame or floor.
Compare the new bundle with the old lines before removing anything, marking each line’s route and connection. Fittings that are flared or sealed differently can cause leaks if mixed up. Use the correct clamps and check every joint for seepage after pressurizing the system. Replacing worn clamps and grommets at the same time is a practical step.
- Check the old lines for pitting or thin spots
- Mark each line’s route before disconnecting
- Test all joints for leaks after pressurizing
Specifications
| Brand | Jeep (Genuine Mopar) |
|---|---|
| Part number | 52100167AB |
| UPC | 70000525089 |
| Material | Steel |
| Replacement type | Stock replacement |
| Engine | 4 or 6 cylinder |
| Fuel tank | 19 gallon |
Vehicle fitment
No vehicle is named for this bundle. Only the engine and tank details above describe where the bundle is used.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Compare the bundle’s contents with your original fuel line set before installing. Check that each line and fitting matches your vehicle.









